WM 6.1 For Your Mogul With Rev A

Please follow these directions exactly and you will have no troubles.

1. run the hard spl unlocker to unlock the bootloader. (exe file)
2. extract the nbh file from the nue rom 2.0 zip
3. drag the nbh from the step above and place in the RUU folder
4. run the exe file in the ruu file and follow the steps.
5. enjoy WM 6.1 on your mogul

http://rapidshare.com/files/88054092/WM6.1.zip.html

[T-Dogg]

Nevermind dash, i fixed it up, thanks.

[mkeezy]

What's so great about WM 6.1? looks the same as 6.0...

[Lopan]

Don't I feel stupid...

[Mandingo]

this isn't the same as the DCD thread is it....

[vdavis1986]

i downloaded...and did step 1 while using the HARD-SPL-MFG my phone screen turned into rainbow colors? anyone else have trouble??? if you have any ideas let me know thanks!!!

[vdavis1986]

i did step one, but now my mogul screen is red green blue and white...any ideas???

[Tigerz]

lolz that screen is the boot loader its alright guyz and no mandingo dcd's is a custom wm6.0 rev a rom not a 6.1 rom

[T-Dogg]

sorry, reposted with link, its in the thread below

[T-Dogg]

hey tigerz, for all those having problems with the phone freezing up on the bootloader, and there phone is completely locked up, have them use this. It saved my life, and i thought my phone was done for. Just for clarification, this is for people who are stuck on the bootloader screen, and "soft resets" and "hard resets" don't help you. You do the reset and it brings you right back to the bootloader screen, frozen.
1. Connect phone to USB port, disable activesync and run the exe.

2. If your having trouble running the .exe it is because active sync is not properly disabled. Go to your task manager and end these tasks.
Wcesmgr.exe
Wcescomm.exe
Rapimgr.exe

3. After this, the .exe should run and just follow steps, and your phone will be unlocked from bootloader mode!

Good Luck with the update!

http://forum.ppcgeeks.com/showthread.php?t=9229

[Tigerz]

aight thanks for posting that hopefully it solves there problems and all seems pretty legit

[D/\SH]

“ Originally Posted by T-Dogg ”

hey tigerz, for all those having problems with the phone freezing up on the bootloader, and there phone is completely locked up, have them use this. It saved my life, and i thought my phone was done for. Just for clarification, this is for people who are stuck on the bootloader screen, and "soft resets" and "hard resets" don't help you. You do the reset and it brings you right back to the bootloader screen, frozen.
1. Connect phone to USB port, disable activesync and run the exe.

2. If your having trouble running the .exe it is because active sync is not properly disabled. Go to your task manager and end these tasks.
Wcesmgr.exe
Wcescomm.exe
Rapimgr.exe

3. After this, the .exe should run and just follow steps, and your phone will be unlocked from bootloader mode!

Good Luck with the update!

ftp://ppcgeeks:ezupload@ftp.ppcgeeks...tan_exitbl.rar

thanks for posting up but we already had this posted at the site.

[Spunks3]

push mail? how do you set it up?

[D/\SH]

“ Originally Posted by Spunks3 ”

push mail? how do you set it up?

same wayt as before i have a tutorial. do a local search for free direct push email

[Spunks3]

“ Originally Posted by D/\SH ”

same wayt as before i have a tutorial. do a local search for free direct push email

got ya, i thought this feature was included... thnx again D/\SH!!

[D/\SH]

“ Originally Posted by Spunks3 ”

got ya, i thought this feature was included... thnx again D/\SH!!

no problem here to help. bad ass rom though bro look at the threaded sms and how they have it set up... if you want send me apm with your number and ill send you a couple texts.

[kaos]

sweet rom.Also d/\sh.I installed from vista. :) . it can be done.you just have to set compatibility to xp and give it admin rights before running.Also on another note.those stuck inboot loader.you don't have to run all those extras steps.All i did was disable usb connect in device manager then run the titan boot loader exiter.then i re enabled usb and updated new rom.

[nyclegend20]

is this the official one that htc will soon release or is this also custom?

[D/\SH]

“ Originally Posted by nyclegend20 ”

is this the official one that htc will soon release or is this also custom?

this is made off a kitched converted from chinese to english. so basically this is the official chinese WM 6.1 but is still the beta for the sprint rev a area. runs great and very fast and smooth. and the threaded sms and the other changes are very nice.

[nyclegend20]

there are 2 diferent links to the new update on Wckediden

which one do i use
one is

http://rs348gc2.rapidshare.com/files...SPCS_NV124.zip

other is

http://rs124.rapidshare.com/files/88054092/WM6.1.zip

[D/\SH]

“ Originally Posted by nyclegend20 ”

there are 2 diferent links to the new update on Wckediden

which one do i use
one is

http://rs348gc2.rapidshare.com/files...SPCS_NV124.zip

other is

http://rs124.rapidshare.com/files/88054092/WM6.1.zip

well i cant tell which thread each one is from. just use the link in the first post that is rapidhsare. we have a plain WM6 rom update with rev a posted and the 6.1 with rev a. so just use the link in the first post.

[nyclegend20]

ok i tireid it
i did the hard spl mfg
then i got a blue red green screen
the it told me on my computer to press any key to continue i did that the update started up then it told me make sure my phone was connected to the pc or synce cradle
im connected idk what to do now?
do you have a video of how to update it?

[D/\SH]

“ Originally Posted by nyclegend20 ”

ok i tireid it
i did the hard spl mfg
then i got a blue red green screen
the it told me on my computer to press any key to continue i did that the update started up then it told me make sure my phone was connected to the pc or synce cradle
im connected idk what to do now?
do you have a video of how to update it?

no becasue it isnt hard to do..... if you unlocked the phone with the provided unlocker, dropped the nbh file in there and ran the exe that says rom update utility it should work no problems...many have done this..... make sure that you have the usb sync to being on..... also i experienced some problemson vista if your using that try to go to an xp machine.

[nyclegend20]

i di the update it said finished
now my phone restarted and now it is just on the black screen where it says htc smart mobility
thats all
nothing happens it just freezes here

[D/\SH]

“ Originally Posted by nyclegend20 ”

i di the update it said finished
now my phone restarted and now it is just on the black screen where it says htc smart mobility
thats all
nothing happens it just freezes here

so a hard reset and see what that does.

[nyclegend20]

i did
it does nothing
it laod with the black screen red letters then red letters disappera and the screen stays black with htc logo
thats all

[D/\SH]

“ Originally Posted by nyclegend20 ”

i did
it does nothing
it laod with the black screen red letters then red letters disappera and the screen stays black with htc logo
thats all

try to reflash the rom on there maby it missed a part or summtin. never heard of this happening to anyone else. you used the mogul one not the touch one correct.

[nyclegend20]

i used the one in the 1st post on this thread
how do i reflash it
i have my usb plugged in but nothing happens
i dont think the usb is working
cause the device is still on the black screen with htc logo

[D/\SH]

“ Originally Posted by nyclegend20 ”

i used the one in the 1st post on this thread
how do i reflash it
i have my usb plugged in but nothing happens
i dont think the usb is working
cause the device is still on the black screen with htc logo

you will be fine plug it in and hold the camera button and the power button down at the same time while soft resetting and that will put you back into bootloader so you can reflash.

[nyclegend20]

ok
im in the loader
do i go to ruu folder directly and open the rom update utility
or do i go to the hard spl again

[kaos]

Ok guys your inluck i did this error by accident and now know why.After i unlocked i installed the rapid link wm6.1.here is where your issue lays.It is a bare rom.doesn't have new radio in it.its basically just a update to overlay the beta sprint 1.So when you phone boots up still has radio 1.47...so it freezes on htc screen..Scared the shit out of me..

heres what you do.....Hold down the cam button, and power button.as your doing this do a soft reset same time by sticking stylus in reset hole.it should go to boot screen red yellow white. you know the one...unplug usb then replug it in...now launch this rom first.

Code

http://rapidshare.com/files/86139116/RUU_TITAN_SPRINT_WWE_3_1_.16.651.0_435009_RS3_27_00_SPCS_NV124.zip

this is actual htc sprint beta has the right radios in it.it will go.resets at 11% so dont freak out it will restart and keep installing.after this is installed then you can install the bare rom

Code

http://rs124.rapidshare.com/files/88054092/WM6.1.zip

this will make it wm 6.1
glad i saved your butts huh.... :yahoo:
just remember to press thank you
let me know how it works for you

[nyclegend20]

if u r not busy can you please like call me and guide me step by step please
im in the loader red greend blue white
dont know what to do now

[D/\SH]

“ Originally Posted by nyclegend20 ”

if u r not busy can you please like call me and guide me step by step please
im in the loader red greend blue white
dont know what to do now

flash to the regular rev a rom than flash over to the WM 6.1 one so it updates the radio.

[nyclegend20]

yo
u jus saved me
i was scared
im try this and see how it works
thanks a lot

[nyclegend20]

ok so once i do the first update then i go directly to the ruu folder and do that update rite
so i dont use the hard spl thing anymore rite?

[kaos]

after the first reva gps sprint beta rom installs.let it start.it will say customizing in 3 press ok.let it install all the goodies...like the radios.after it finishes it will reboot.after it starts then..you can install the other rom..wm6.1

[nyclegend20]

“ Originally Posted by kaos ”

after the first reva gps sprint beta rom installs.let it start.it will say customizing in 3 press ok.let it install all the goodies...like the radios.after it finishes it will reboot.after it starts then..you can install the other rom..wm6.1

oo
i did the wm 6.1 before it installed all the sprint stuff
is there a way i can go back and redo it?

[D/\SH]

“ Originally Posted by nyclegend20 ”

oo
i did the wm 6.1 before it installed all the sprint stuff
is there a way i can go back and redo it?

you have to reflash back to the 6.0 rev a rom than back to the 6.1 after that all installs.

[nyclegend20]

dash
i saw in your youtube video you had the sprint navination aplication
where did you get that from?

[D/\SH]

“ Originally Posted by nyclegend20 ”

dash
i saw in your youtube video you had the sprint navination aplication
where did you get that from?

i got the cab file..... bout to post it up here at the site in a second... in the original rev a rom the sprint customizations downloaded it....... so in like 3 minutes do a quicker search for sprint navigation

[D/\SH]

“ Originally Posted by D/\SH ”

i got the cab file..... bout to post it up here at the site in a second... in the original rev a rom the sprint customizations downloaded it....... so in like 3 minutes do a quicker search for sprint navigation

heres the link for you bro.

[nyclegend20]

all the sprint stuff was customized on the 3.16 but when i updated to the wm 6.1 after that
i dont have any of that customization anymore
no sprint stuff just basic wm programs
is there something wrong here?

[kaos]

the key files are in place now.stuff like nav are in the extended rom.do a quick search for it im sure dash has posted it.its a basic wm 6.1 all the goodies in the sprint beta you can add in....Just takes a little searching....I recommend quick menu as a must.

[nyclegend20]

but are they suppose to stay there
like did they stay for you?
cause when i go on ie it says cannot cannot
so i dont know?

[D/\SH]

“ Originally Posted by nyclegend20 ”

but are they suppose to stay there
like did they stay for you?
cause when i go on ie it says cannot cannot
so i dont know?

i have no problem connecting myself....... try pieplus if you are having a problem or a hard reset.... this just isnt your day is it lol..... i had mine done with installs in 1.5 hours

[kaos]

na dash his issue is he needs the extended rom....It has the iota cab in it. along with others


here i up loaded it for you

D/\SH EDIT- heres a working one for you. http://rapidshare.com/files/88489866...tools.cab.html

[nyclegend20]

where can i get this rom
lol
man
today has been very crazy with this update
lol
now i have 3.16 and wm 6.1 but no sprint config

[kaos]

look in the post above your last.it is there

[nyclegend20]

what is this going to do?
im still waiting few minutes to use rapidshare
but lookits the same thing as the other roms rite?

[D/\SH]

“ Originally Posted by nyclegend20 ”

what is this going to do?
im still waiting few minutes to use rapidshare
but lookits the same thing as the other roms rite?

its not a rom. what is does is makes the external rom with all the sprint updates visible to see. you install go to program files than it will say unlock successful than soft reset again and you will see the external rom