Garmin City Navigator North America Nt 2009

[AL_CAPONE_X3]

alright guys i did the file in that folder someone just told me 2 do. sorry his name slipped my mind.


but i come across this error in the installation. . .




im sure i have it cuz i see an cab file ("disk 1.cab") in that same folder. so i dont see wat gives wit this error

[MikeyD]

“ Originally Posted by BigBadWolf77 ”

You can pretty much find anything you are looking for via torrents. I personally useteh fishing hot spots maps, but i have seen lots of others out there. Pirate Bay is a good source for maps.

Ill Check it out

[MikeyD]

“ Originally Posted by AL_CAPONE_X3 ”

alright guys i did the file in that folder someone just told me 2 do. sorry his name slipped my mind.


but i come across this error in the installation. . .




im sure i have it cuz i see an cab file ("disk 1.cab") in that same folder. so i dont see wat gives wit this error

I just reinstalled and did not get an error, dont know what your doing wrong

[AL_CAPONE_X3]

“ Originally Posted by mduran2288 ”

I just reinstalled and did not get an error, dont know what your doing wrong

im not sure either since i obviously have that cab file in the same folder. . .the file below the cab file in the screen shot is the one i was suppose to click on. . .but yet it says i cant find it!?

[BigBadWolf77]

Did you guys download the Megaupload links or the Rapidhsare links? Kaos may have altered the rapidsharedownload to get rid of the ISO, and if that is the case I don't know how to tell you to proceed. BUT Al if you are trying to run the install from inside the RAR like you were doing on the other file it wont work. You have got to extract them and then run the installer.

[AL_CAPONE_X3]

“ Originally Posted by BigBadWolf77 ”

Did you guys download the Megaupload links or the Rapidhsare links? Kaos may have altered the rapidsharedownload to get rid of the ISO, and if that is the case I don't know how to tell you to proceed. BUT Al if you are trying to run the install from inside the RAR like you were doing on the other file it wont work. You have got to extract them and then run the installer.

my bad im really late on the reply but i did the megaupload links since there was only 5 and like 20 rapidshare links and i dont have an account for rapidshare so the free megaupload was faster and easier for me.


but honestly i did extract them i believe

[MikeyD]

This is the steps i took:

Extract all the files into a garmin folder i created
Once they were extracted they went into a folder labled:Garmin Mapsource City Navigator North America NT 2009 Update
Then i went into that folder then the Windows folder then the MSI folder then i clicked on the icon labeled:CNNANT2009Update_ENU
Then i followed the steps to ulock the maps and

WOW I was GOLDEN!!!!!

It was not that hard.

[AL_CAPONE_X3]

“ Originally Posted by mduran2288 ”

This is the steps i took:

Extract all the files into a garmin folder i created
Once they were extracted they went into a folder labled:Garmin Mapsource City Navigator North America NT 2009 Update
Then i went into that folder then the Windows folder then the MSI folder then i clicked on the icon labeled:CNNANT2009Update_ENU
Then i followed the steps to ulock the maps and

WOW I was GOLDEN!!!!!

It was not that hard.

well that process hadnt worked for me and i dont understand why since i did everything u did.

[AL_CAPONE_X3]

“ Originally Posted by AL_CAPONE_X3 ”

well that process hadnt worked for me and i dont understand why since i did everything u did.

now im at home i can give proof that i did those steps. . .


















and i get this error when trying to run it. . .








so it has to be that hard since i did it all right!? and its not working. . .!?

[BigBadWolf77]

“ Originally Posted by AL_CAPONE_X3 ”

so it has to be that hard since i did it all right!? and its not working. . .!?[/B]

It's not hard. You are not following the instructions. When you double click a .RAR file it will open the RAR into a temp folder, and in some cases you can successfully run and install programs from inside the archive. THIS IS NOT ONE OF THOSE TIMES. The pictures that you posted are actually proof that you didn't follow the instructions. Those are not pictures of the contents of a folder. There are pictures of the archive browser WinRAR. The main give-away are the folders with the .. after them. Also error box shows the the file location that ends in temp/Rar$dI33.906/disk1.cab shows that you are trying to work from inside an archived folder.

This is the same trouble you were having with the actually Garmin program last week. You can either rightclick the .rar file and tell it to extract the files or you can double click the file and use the extract to button that WinRAR gives you. Either way, once you actually get the file extracted the installer will be able to see the files. The installer doesn't know how to look inside the RAR for the files it is trying to verify. how bout tapping that thanks button.

[peckerwood]

will this work for the gps in my truck nuvi 200 if not can u get one that work for me thank

[D/\SH]

“ Originally Posted by peckerwood ”

will this work for the gps in my truck nuvi 200 if not can u get one that work for me thank

im not sure what that is but everything here is for your ppc.

[peckerwood]

talking about a navigator that u use 4 your car can i update mines with this program here, went to garmin.com and it cost 70.00 to update my gps system

[D/\SH]

“ Originally Posted by peckerwood ”

talking about a navigator that u use 4 your car can i update mines with this program here, went to garmin.com and it cost 70.00 to update my gps system

well we a ppc site not a car gps site.

[BigBadWolf77]

“ Originally Posted by peckerwood ”

talking about a navigator that u use 4 your car can i update mines with this program here, went to garmin.com and it cost 70.00 to update my gps system

If your GPS system uses Map Source to do it's updates, in theory this could ork for you.

[sl8dogg]

Thanks Yall. I already got GMXT, and confirmed I'm getting a GPS signal in GMXT. Just need the maps now. Downloading from rapidshare (Taking forever on T1 even). I haven't seen anyone confirm they have this working on a Sprint Touch with a GPS rom. I'll let yall know how it goes assumng i can get the Power ISO to work. Props.

Edit: By the way, I didn't even need to use Power ISO afterall. It ran from my desktop after I extracted it anyways. Seen some people have had to do the mount, others have not. Don't know why.



EDIT: WOO HOO. Transferring maps now. Gotta go test it out.

Edit: this is way too sick. I do think that now my touch is up to par with your moguls. No more touch bashing yall. Ha... Seriously worth the time to put this on my phone. Esp since telenav isnt supported for the touch yet and they want you to pay for it. Thanks again, and id also like to thank god, and most importantly the academy, and all the little people that made this possible. Peace....

[oghennylo]

you guys are great
I'm stuck at the part get unit ID
I am connected to the computer with active sync
i click find device and it says some devices were found but none have the capabilities. it also says I may need to set the gps to garmin or host. thank you for your time and effort I have told many people including my mother in law to check out Wckediden.

[sl8dogg]

Get unit is within the garmin program. Not the phone menu settings. Hope that helps, cause it works. Go in garmins menu to settings unit id.

[oghennylo]

thank you
I am in mapsource
I go to utilities
get unit id
then ?

[VenumX]

“ Originally Posted by sl8dogg ”

Thanks Yall. I already got GMXT, and confirmed I'm getting a GPS signal in GMXT. Just need the maps now. Downloading from rapidshare (Taking forever on T1 even). I haven't seen anyone confirm they have this working on a Sprint Touch with a GPS rom. I'll let yall know how it goes assumng i can get the Power ISO to work. Props.

Edit: By the way, I didn't even need to use Power ISO afterall. It ran from my desktop after I extracted it anyways. Seen some people have had to do the mount, others have not. Don't know why.



EDIT: WOO HOO. Transferring maps now. Gotta go test it out.

Edit: this is way too sick. I do think that now my touch is up to par with your moguls. No more touch bashing yall. Ha... Seriously worth the time to put this on my phone. Esp since telenav isnt supported for the touch yet and they want you to pay for it. Thanks again, and id also like to thank god, and most importantly the academy, and all the little people that made this possible. Peace....

haha yeah i got it working with the touch a while ago, it works amazing, then i installed the Alt+tab app so i could just click the camera button and it would switch over to the audio manager and i could change songs, then press the camera button again and it switched back to garmin. Works real good :)

[sl8dogg]

“ Originally Posted by oghennylo ”

thank you
I am in mapsource
I go to utilities
get unit id
then ?

Put your unit id into the keygen that yo downloaded In the .Rar file

Posted via Mobile Device

[oghennylo]

I'm sorry I'm not trying to be difficult.
How do I get the unit id#?
I click on find device in the Get unit ID Box and it does not give me a unit id or a choice to pick a device it just says
some devices were found but do not have the capabilities. make sure unit is turned on and connected to computer. you may also need to set the interface option on your gps to garmin or host?
thank you for your help

[sl8dogg]

“ Originally Posted by oghennylo ”

I'm sorry I'm not trying to be difficult.
How do I get the unit id#?
I click on find device in the Get unit ID Box and it does not give me a unit id or a choice to pick a device it just says
some devices were found but do not have the capabilities. make sure unit is turned on and connected to computer. you may also need to set the interface option on your gps to garmin or host?
thank you for your help

Make sure youre plugged in and connected with active sync or wm device center. If so, and mapsource doesnt reconize it, I dont know what to tell you. Good luck.

Posted via Mobile Device

[oghennylo]

Thank you
I am connected but I still get the
some devices were found but do not have the capabilities. make sure unit is turned on and connected to computer. you may also need to set the interface option on your gps to garmin or host?
I gonna keep trying

[kaos]

“ Originally Posted by oghennylo ”

Thank you
I am connected but I still get the
some devices were found but do not have the capabilities. make sure unit is turned on and connected to computer. you may also need to set the interface option on your gps to garmin or host?
I gonna keep trying

start garmin on phone then connect it to pc..

[oghennylo]

thank you kaos. please forgive troubles.
I have Garmin installed on my pc but not on my mogul. How would I start it on my phone. I'm on step number 7 according to big bad wolf

[kaos]

“ Originally Posted by oghennylo ”

thank you kaos. please forgive troubles.
I have Garmin installed on my pc but not on my mogul. How would I start it on my phone. I'm on step number 7 according to big bad wolf

thats your issue...search board for garmin grab latest version and install to mogul..these are just the maps to install but you need garmin on mogul first..

[oghennylo]

I feel like a dummy. Thank you for pointing me in the right direction. Take care Kaos.

[kaos]

“ Originally Posted by oghennylo ”

I feel like a dummy. Thank you for pointing me in the right direction. Take care Kaos.

no worries..you will need these after so don't delete them...these will give you the maps..but first get program.:brows:

[geekypc]

Quick question
I keep getting the following error - "Either muiltpart or currupt ZIP archive"
I have downloaded 3 diff files (mega & both torrents uncompressed & compressed)
I thinking its this $@*!'n vistacrap.
Anyone else having this issue.

[sl8dogg]

“ Originally Posted by geekypc ”

Quick question
I keep getting the following error - "Either muiltpart or currupt ZIP archive"
I have downloaded 3 diff files (mega & both torrents uncompressed & compressed)
I thinking its this $@*!'n vistacrap.
Anyone else having this issue.

I'd try the rapidshare one next. It may well be Vista being "special" but I don't know. I'm on XP. I used the rapidshare if I remember correctly and it worked fine. Make sure you have all of the files in the split archive before you extract.

[geekypc]

It was Vista!
It nice when you burn an ISO with Nero under Vista & you reinsert burned DVD to launch and Vista says its a "blank disk". But when you run same DVD on XP it works just fine.
Well thats the story, installed thru an XP machine & all is working.
Thanks

[hueman84]

About how much space will these maps take up on the SD card? I am starting to really regret going with the 2GB SD.

[VenumX]

for all of new england it took like 300 mb...depends how many maps your putting on and which states and stuff :) i would switch to a 4 gb card if you plan on doing a lot with your phone! only like $45 at sprint now i think.. and you can find them wayy cheaper online! try a site like slickdeals.net and you may find good deals on 4gb microsd cards :D

[CoachNH]

I think you can get the entire mapset onto your card in a little less than a gig. Going with a 4 gb card is definitely the way to go. You can find them online very reasonably priced. Meritline.com has the 4GB card SDHC type for $21.99 and no shipping cost. I believe the 6800 can handle SDHC now.

[camelfoo]

i got my 4gb card in today

ordered from amazon. cost about 18 with shipping sandisk brand :-P

in the process of downloading this. already installed the app :)

[1pensfan]

Just a note on the whole ".iso" vs. "folders" trouble - I am using a mac, and like some others, extracting the .zip file produces files and folders, not an .iso image file.

As long as you follow the original instructions (especially all of step 2) as best you can, this won't cause problems.

**EDIT** I also did it on my XP system and got the same thing. . . files and folders, not an .iso

[rev800x]

Awesome app! Works great on my 6800 with Mobile XT and also was able to install entire Michigan Snowmobile maps that lay over top of the CNNA NT 2009 map. This is one of the best apps I've downloaded for my phone, only second to WeatherPanel!

[D/\SH]

“ Originally Posted by rev800x ”

Awesome app! Works great on my 6800 with Mobile XT and also was able to install entire Michigan Snowmobile maps that lay over top of the CNNA NT 2009 map. This is one of the best apps I've downloaded for my phone, only second to WeatherPanel!

hahahahahah glad that you like it bro and enjoy :>

[cwachtl]

i finally got this to work. if anyone is trying to update on the mogul don't do it through active sync take the sd card out and load directly on it. also i found a map unlocker from dash that unlocks all maps and was a breeze past that

[D/\SH]

“ Originally Posted by cwachtl ”

i finally got this to work. if anyone is trying to update on the mogul don't do it through active sync take the sd card out and load directly on it. also i found a map unlocker from dash that unlocks all maps and was a breeze past that

cool beans glad that you got it..... and if you hasvent already could you please press the thanks button as well as the installed button :>

[PsyChoTk]

Here is the Florida 2009 map. simply extract and copy to the Garmin file on your storage card.

http://rapidshare.com/files/168398417/FNT09.rar

[kaos]

“ Originally Posted by godslunatk ”

Here is the Florida 2009 map. simply extract and copy to the Garmin file on your storage card.

http://rapidshare.com/files/168398417/FNT09.rar

dude it wont work...garmin is id specific...per device....

[PsyChoTk]

“ Originally Posted by kaos ”

dude it wont work...garmin is id specific...per device....

really???:BangHead: The mapid is inside the file. I copied this to my storage card without any problems.

[Scottishwarrior]

Hey guys,
I was trying to download the parts and the first part download link doesn't work. Any way to get a link that works. Thanks

[drdrewdown]

“ Originally Posted by Scottishwarrior ”

Hey guys,
I was trying to download the parts and the first part download link doesn't work. Any way to get a link that works. Thanks

the megaupload link for part1 works just fine, i just did it. there is also a link to the ISO file posted on there too.. not sure what you are having problems with.

[Superman369]

“ Originally Posted by drdrewdown ”

the megaupload link for part1 works just fine, i just did it. there is also a link to the ISO file posted on there too.. not sure what you are having problems with.

Correct, the link is fine. It takes you to a mega-upload page, and you have to enter a 3 digit combination in a box on the top left (the sites way to make sure your not a bot) then it will redirect you to the download page where you can choose free download or premium download.:)

[Scottishwarrior]

Thanks Guys,
Apparently there was something happening on my end. The last files all downloaded fine but it kept erroring out on the first. I finally get it to download a couple days later. Everything else working properly. Thanks for the responses.

Jay

[Superman369]

“ Originally Posted by Scottishwarrior ”

Thanks Guys,
Apparently there was something happening on my end. The last files all downloaded fine but it kept erroring out on the first. I finally get it to download a couple days later. Everything else working properly. Thanks for the responses.

Jay

Glad you got it to work:) Make sure you hit the thanks button to anyone who helped ya, and dont forget to hit the thanks and installed button in the original post if you havent yet:)

[sciroccs]

Greetings All,

After reading all the posts on this topic, I am continuing to have an issue. Installing City Navigator and unlocking the maps on my XP desktop was a cinch. The issue arises after I transfer the selected map to my Mogul. After starting up the unlocked Mobile XT on my device, the maps are detected, but I am then informed that my maps need to be unlocked. Any help would be greatly appreciated. Excellent site by the way. Thanks in advance.