[RELEASE] Garmin Mobile XT for Windows Mobile software version 50020w

Garmin Mobile XT for Windows Mobile software version 5.00.20w


Requirements: Windows Mobile 2003/SE/WM5/WM6 PocketPs with GPS receiver
Overview: Add full-featured navigation to your GPS-enabled smartphone with Garmin Mobile XT. Just plug this data card into your compatible phone¹ (see specs tab) and start navigating. With no monthly fees, preloaded maps, turn-by-turn directions, real-time services and only $99, this easy-to-use data card has everything you need to navigate to the front door.

Notes:

* The Garmin Mobile XT for Windows Mobile software is designed for use on Microsoft Windows Mobile Pocket PC and Smartphone devices.
* You must have a previous version of the XT software installed on your SD card to have all of the help files, voice files and basemap files. These are not included with this update.
* During installation, you will be prompted to turn on your GPS device.
* A minimum card size of 256 MB is recommended for Garmin Mobile XT software with maps.
* If you have previously installed the Garmin Que for Pocket PC application, you must uninstall Garmin Que before installing the Garmin Mobile XT application.
* If you are updating from version 4.10.40 or earlier, you may encounter a new input screen the first time you start the application after the update. If you have a Garmin GPS receiver, select the appropriate link to connect to the receiver.

Change History
Changes made from version 5.00.10 to 5.00.20:

* Update the subcategories listed for City Navigator Europe 2009 maps.
* Correct various out of memory conditions that can occur.
* Correct the processing of a received Location Message to not save the point on the Recent Finds list.
* Correct the processing of received text messages to not close the GMXT application when a text message is received without a subject.
* Correct an error that occurs when a headset is plugged into some devices.
* Correct the use of the directional pad for movement between hyperlinks within Flight Status.
* Correct saving and editing waypoints with non-English characters.

Changes made from version 5.00.00 to 5.00.10:

* Correct My Locations list to display the last item on the list.
* Correct display of the Estimated Departure Time within Flight Status.
* Correct various Google Local Search and Panoramio language issues.
* Correct Google Local Search to return to the correct previous page when selecting 'Back'.
* Correct Panoramio display so that it doesn't wrap back to the first item after reaching the end of the list.

Changes made from version 4.xx.xx to 5.00.00:

* Update the look and feel of the Garmin Mobile XT application.
* Add new Garmin Online feature - Google Local Search.
* Add new Garmin Online feature - Panaramio photos.
* Add new Garmin Online feature - Flight Status.
* Add Speed Limit display to the View Map.
* Add ability to install and display custom vehicle icons.
* Modify 'Peerpoints' feature name to 'Location Message'.


More Info:
Code:

http://www8.garmin.com/support/colle...t=010-00579-00

Download Instructions: All credits for the keygen go to JetMouse, as well as Lord Yuz and starix who helped with the creation of the keygen.

Code:

Installation procedure:

a) Start installation of 'GarminMobileXTforWindowsMobile_5.00.20w.exe' from PC through ActiveSync. Select your Storage Card as destination. During the installation, files will be copied to your storage card. The files should appear in '\Storage Card\Garmin\Apps\WM'.
b) Install 'GarminMobileXTSupportFiles_5xxxx.exe' for voice files. In storage card
c) Install 'GarminMobileXTFreeBasemap_5xxxx.exe' for Garmin's base map. In storage card
d) Run GarminMobileXT and click "Connect to a Garmin GPS" go to 'setting\about' record the Unit ID and use keygen to create unlock key.
e) Save as sw.unl file.
f) Copy 'sw.unl' to '\Storage Card\Garmin'.

Garmin Mobile XT for Windows Mobile software version 5.00.20w as of September 23rd, 2008

Download:
http://rapidshare.com/files/16388694...First_Poop.rar

passowrd
kaos@Wckediden

you can get vehicle icons here
http://www8.garmin.com/vehicles/bund...lvehicles.html


On a side note!!!
This works on Touch Pro Perfect..All Screen Shots Are Off My Pro.

[mike0122]

yeah its XT its working on my TP2 but its just the base maps I have used the keygen for the maps and installed them but they dont show up on my phone

[PsyChoTk]

“ Originally Posted by mike0122 ”

yeah its XT its working on my TP2 but its just the base maps I have used the keygen for the maps and installed them but they dont show up on my phone

ok, doesn't show up in explorer or using the app??? if you download the unlocked map from linksave, its the whole US unlocked and will overwrite the basemap, thus giving you the entire country. however, its a 1gb file so make sure you have a larger sd card. but, no need to update when you travel. :)

[mike0122]

It doent show up on the app just the base map. I had to leave the house I will try that when I get home. I'll post the results thanks for the hetlp

[PsyChoTk]

“ Originally Posted by mike0122 ”

It doent show up on the app just the base map. I had to leave the house I will try that when I get home. I'll post the results thanks for the hetlp

this should take you to the unlocked base map. one you download, move the iso to the garmin folder on your sdcard

Code

http://linksave.in/7013237049e2b4d5c0cfc

[mike0122]

So I might have confused you I dont need the base map It is on the GMXT app. I unlocked the city navigator north america NT map with the key gen copy the gmapsupp.unl file to the SD card. It shows on the card but when I load GMXT it don't get any new maps. The base map is the only one there. Im working on downloading that map from linksave. I hope it works I'd like to have the whole US map. I found this and I know its for the PC version but my phone says SOFTWARE UNIT ID not DEVICE ID but GMXT seems to run and tracks me fine.

This is what I read ---> If you managed to start this software in Trial Mode, you won't see any "Device ID" in your Settings -> About page You will find a kind of "Software Unit ID" instead and you CANNOT GENERATE an unlock code for it!!! If this is your case, close down GMPC, then go to C:\Documents and Settings\<USERNAME>\Application Data\Garmin\GarminMobilePC and delete its content. The proceed from Step 2.

Anyone else phone say the same thing?

[PsyChoTk]

“ Originally Posted by mike0122 ”

GMXT it don't get any new maps. The base map is the only one there.

by just installing the baseamap you get nothing on the display but your car icon. there are no maps loaded yet. you have to load maps to the sd card. if you have unlocked the whole usa maps on your pc, you should be albe highlight the maps you want then transfer them to the sd card. teh link save will eventually give you the whole usa unocked. i'm running it right now w/o any issues.

“ Originally Posted by mike0122 ”

This is what I read ---> If you managed to start this software in Trial Mode, you won't see any "Device ID" in your Settings -> About page You will find a kind of "Software Unit ID" instead and you CANNOT GENERATE an unlock code for it!!! If this is your case, close down GMPC, then go to C:\Documents and Settings\<USERNAME>\Application Data\Garmin\GarminMobilePC and delete its content. The proceed from Step 2.

Anyone else phone say the same thing?

go into teh garmin folder on your sd card adn delete the sw.unl file and run garmin again. select the 4th option, connect to a gps device, cancel teh search for the gps, goto tools/settings/downarrow to about/ select about and you will see your card id.

[mike0122]

Update I installed that 1 gig map to my sd card today and then opened up GMXT and finally I have the detailed map of the US. Everything is working now but if for some reason it stops I will uninstall that sw.unl file and reinstall Garmin. Maybe because I just had the software unit ID thats why the other maps didn't work but sense that 1 gig map did I'll leave it alone for now. I can't thank you enough PsyChoTK for the help.

[kaos]

“ Originally Posted by mike0122 ”

Update I installed that 1 gig map to my sd card today and then opened up GMXT and finally I have the detailed map of the US. Everything is working now but if for some reason it stops I will uninstall that sw.unl file and reinstall Garmin. Maybe because I just had the software unit ID thats why the other maps didn't work but sense that 1 gig map did I'll leave it alone for now. I can't thank you enough PsyChoTK for the help.

what about the poster lol.

[PsyChoTk]

“ Originally Posted by kaos ”

what about the poster lol.

my names fancy with uppercase letters.....

[PsyChoTk]

“ Originally Posted by mike0122 ”

Update I installed that 1 gig map to my sd card today and then opened up GMXT and finally I have the detailed map of the US. Everything is working now but if for some reason it stops I will uninstall that sw.unl file and reinstall Garmin. Maybe because I just had the software unit ID thats why the other maps didn't work but sense that 1 gig map did I'll leave it alone for now. I can't thank you enough PsyChoTK for the help.

the sw.unl file is the serial number for your card. if you delete it, you have to generate another one and drop it into the garmin folder. also there is a map id .txt file. my map id is 425. i can't say if it will help but drop the attached txt in the garmin folder and let me know if it works.

[PsyChoTk]

“ Originally Posted by PsyChoTk ”

the sw.unl file is the serial number for your card. if you delete it, you have to generate another one and drop it into the garmin folder. also there is a map id .txt file. my map id is 425. i can't say if it will help but drop the attached txt in the garmin folder and let me know if it works.

I can't edit my post so could a mod hook me up.


make sure you have a map .unl file as well check this thread for instructions i posted just before/ and after this one

Code

https://www.wckediden.com/garmin-city-navigator-t187291p4.html

[mike0122]

“ Originally Posted by kaos ”

what about the poster lol.

Haha you got the first thanks and the install also!

[kaos]

“ Originally Posted by mike0122 ”

Haha you got the first thanks and the install also!

you can get you unit id from program mapsource under tools. or on garmin under about

[ebuzz]

Can someone tell me the difference between this app and this one Garmin City Navigator North America?

[kaos]

“ Originally Posted by ebuzz ”

Can someone tell me the difference between this app and this one Garmin City Navigator North America?

you need both...
this is the program...the other is the maps you need for this program...

[ebuzz]

“ Originally Posted by kaos ”

you need both...
this is the program...the other is the maps you need for this program...

So I need to download this as well as those 20 files I got that said "Kaos Love" from the other thread?

[DASH]

“ Originally Posted by ebuzz ”

So I need to download this as well as those 20 files I got that said "Kaos Love" from the other thread?

yes thus why he said you will need both.... one is the program and the other is the maps that you will need...... both parts need to be present to get this to work

[ebuzz]

“ Originally Posted by D/\SH ”

yes thus why he said you will need both.... one is the program and the other is the maps that you will need...... both parts need to be present to get this to work

Do I have to get both the "code" file and the "babysfirstpoop" file?

[livinlifes2shor]

The lnik for the voices and base map finds nothing can some one post those files or direct me to another link? Thanks