[ ISSUE SOLVED ] Looking for touch pro rom WM 65 Touchflo 3D2

[xx_jackass_xx]

I read on another thread that there is a rom floating around with windows 6.5 and touchflo 3d 2 anyone know where i can find this rom? i thought they said Jucy Rom 5 but i cant find it anywhere

[parna1973]

hope this is the one doesnt say 6.5 but is juicy rom 5..hope it helps..

Code

https://www.wckediden.com/showthread.php?t=178502&highlight=mighty

[jr5416]

“ Originally Posted by xx_jackass_xx ”

I read on another thread that there is a rom floating around with windows 6.5 and touchflo 3d 2 anyone know where i can find this rom? i thought they said Jucy Rom 5 but i cant find it anywhere

Y not go for juicy7 bro its the latest version .Has 6.5 and touchflo3d-2

Code

https://www.wckediden.com/showthread.php?t=183000

[D/\SH]

“ Originally Posted by jr5416 ”

Y not go for juicy7 bro its the latest version .Has 6.5 and touchflo3d-2

Code

https://www.wckediden.com/showthread.php?t=183000

was going to do the same but you beat me to the punch lmao..... but you odnt have to go with juicy to achieve that since many different chefs have both built into their roms now as pretty much the core for all future custom roms.... or at least until the new interface comes out than that will take over something lmao

[xx_jackass_xx]

it says Version: WM 6.1

Dash in your opinion whats the best 6.5 tf3d-2 rom out

[D/\SH]

“ Originally Posted by xx_jackass_xx ”

it says Version: WM 6.1

Dash in your opinion whats the best 6.5 tf3d-2 rom out

i dont use touchflo 3d2 anymore but when i did it was the juicy 7 rom for sure for all uses...... all touchflo 3d-2 roms are going to have some bugs and that borthers me so i went to the 6.5 caulkins touch pro clean rom without any version of touchflo and loving it right now with mobile shell and the stock 6.5 interface.

[crazaytalent]

“ Originally Posted by xx_jackass_xx ”

it says Version: WM 6.1

Dash in your opinion whats the best 6.5 tf3d-2 rom out

Juicy rom 5 isnt wm 6.5 it 6.1... need Juicy rom 7.. but as Dash said, there are quite a few to choose from... there is mighty rom 5 (which you may have confused w/ juicy 7)... there is also phantom rom and my personl favorite Starrom 1.4 or 1.5

[jr5416]

“ Originally Posted by xx_jackass_xx ”

it says Version: WM 6.1

Dash in your opinion whats the best 6.5 tf3d-2 rom out

Yea well thats gotta be edited bro but it has 6.5 and touchflo3d-2 and DASH said mighty rom5 is better then juicy7 but it dont have touchflo3d-2 thats y i suggested juicy7 bro

[xx_jackass_xx]

thanks for all your help guys i used to put custom roms on my mogul...got 2 of them sitting there not being used.... now i got my touch pro and im nervous to put custom rom on with mogul i had a backup with touch pro i dont lol i gotta build up the stones.. lol i need to look for the oem sprint rom so i can flash it back if it has to go back to sprint makes me nervous also

[D/\SH]

“ Originally Posted by xx_jackass_xx ”

thanks for all your help guys i used to put custom roms on my mogul...got 2 of them sitting there not being used.... now i got my touch pro and im nervous to put custom rom on with mogul i had a backup with touch pro i dont lol i gotta build up the stones.. lol i need to look for the oem sprint rom so i can flash it back if it has to go back to sprint makes me nervous also

you can find the stocker stickied in the roms area.... they should have an update coming soon since they just released one for the diamond and that will be able to be foundhere as well as at htc's site

[xx_jackass_xx]

and here we go wish me luck

been on 0% for what seems like FOREVER

--------- New Post Merged on 23/4/2009 at 01:36:13 --------

had a communication error trying again

--------- New Post Merged on 23/4/2009 at 01:39:08 --------

update error 262? HMM

--------- New Post Merged on 23/4/2009 at 01:45:01 --------

did a hardreset and tried it again got the same problem hmm any ideas?

[D/\SH]

“ Originally Posted by xx_jackass_xx ”

and here we go wish me luck

been on 0% for what seems like FOREVER

--------- New Post Merged on 23/4/2009 at 01:36:13 --------

had a communication error trying again

--------- New Post Merged on 23/4/2009 at 01:39:08 --------

update error 262? HMM

--------- New Post Merged on 23/4/2009 at 01:45:01 --------

did a hardreset and tried it again got the same problem hmm any ideas?

well we donbt know what rom you asre flashing since you arent following the forum rules and posting i nthat thread.... and you most likely didnt follow the tutorial for flashing meaning that you dont have your device unlocked for flashing.... take a look at my signature belowa and you will find the tutorial that i am talking about.

[xx_jackass_xx]

ok so i tried to update though the micro sd card and it is just sitting on loading

Instructions followed
Flash from microSD Card (Thanks to MadlyAlive):

1. Make sure you backup anything that is necessary to your day to day operations! At a minimum, please perform an ActiveSync to Outlook or your Exchange server prior to flashing!
2. Rename the custom ROM NBH file from RUU_Signed.nbh to RAPHIMG.nbh
3. Copy RAPHIMG.nbh to the root of your microSD Card.
4. Hold the Volume Down and Power button simultaneously. While you're still holding those 2 buttons, press the reset button with your stylus.
5. When your Touch Pro tells you to do so, press the power button to begin the flash process. If you do not get the message to press the power button to flash, there is a mistake in the name of the NBH file or you do not have the file at the root of your microSD card.
6. When flashing is complete, perform a soft reset.

my appologies i am flashing jucy 7 and it says security unlocked i guess i thought that ment i could flash it sorry

--------- New Post Merged on 23/4/2009 at 02:06:14 --------

“ Originally Posted by xx_jackass_xx ”

and here we go wish me luck

been on 0% for what seems like FOREVER

--------- New Post Merged on 23/4/2009 at 01:36:13 --------

had a communication error trying again

--------- New Post Merged on 23/4/2009 at 01:39:08 --------

update error 262? HMM

--------- New Post Merged on 23/4/2009 at 01:45:01 --------

did a hardreset and tried it again got the same problem hmm any ideas?

unlocked and flashing though micro sd now :) thanks u

[D/\SH]

“ Originally Posted by xx_jackass_xx ”

ok so i tried to update though the micro sd card and it is just sitting on loading

Instructions followed
Flash from microSD Card (Thanks to MadlyAlive):

1. Make sure you backup anything that is necessary to your day to day operations! At a minimum, please perform an ActiveSync to Outlook or your Exchange server prior to flashing!
2. Rename the custom ROM NBH file from RUU_Signed.nbh to RAPHIMG.nbh
3. Copy RAPHIMG.nbh to the root of your microSD Card.
4. Hold the Volume Down and Power button simultaneously. While you're still holding those 2 buttons, press the reset button with your stylus.
5. When your Touch Pro tells you to do so, press the power button to begin the flash process. If you do not get the message to press the power button to flash, there is a mistake in the name of the NBH file or you do not have the file at the root of your microSD card.
6. When flashing is complete, perform a soft reset.

my appologies i am flashing jucy 7 and it says security unlocked i guess i thought that ment i could flash it sorry

--------- New Post Merged on 23/4/2009 at 02:06:14 --------




unlocked and flashing though micro sd now :) thanks u

did you format the card to FAT32 beforehand?

[xx_jackass_xx]

nope the instructions on your sig didnt state i needed to format it it worked though

--------- New Post Merged on 23/4/2009 at 03:25:46 --------

Loving it SOO SMOOTH only i miss my M$ Word :(

[mrpants20]

“ Originally Posted by xx_jackass_xx ”

nope the instructions on your sig didnt state i needed to format it it worked though

--------- New Post Merged on 23/4/2009 at 03:25:46 --------

Loving it SOO SMOOTH only i miss my M$ Word :(

Don't miss it anymore....

https://www.wckediden.com/showthread...ghlight=office

[xx_jackass_xx]

thanks bro but... link doesnt work lol thanks though
found a working link on another page though thanks

[Superman369]

Thread closed. Solved.