Garmin Mobile XT for WindowsMobile V42020wp

[D/\SH]

Garmin Mobile XT for WindowsMobile V4.20.20wp
Requirements: Windows Mobile 2003/SE/WM5/WM6 PocketPs with GPS receiver
Overview: Add full-featured navigation to your GPS-enabled smartphone with Garmin Mobile XT. Just plug this data card into your compatible phone¹ (see specs tab) and start navigating. With no monthly fees, preloaded maps, turn-by-turn directions, real-time services and only $99, this easy-to-use data card has everything you need to navigate to the front door.
Image Image

Changes made from version 4.10.40w to 4.20.20w:

Provide EULA dialog and accept choice before installation of the application.
Provide support for Brazilian Portuguese text display.
Provide support for version 1.60 of the QueAPI.
Provide support for Afrikaans language.
Provide additional gain for European and Brazilian Portuguese voice output.
Provide text updates for Brazilian Portuguese.
Update the backlight override setting for 'On While Routing' to include staying on while a route calculation is pending.
Update various translations for Slovenian, Spanish, Swedish and Turkish.
Update Mexican food category to Spanish/Mexican food category.
Update the display color of parks and water on the maps at night.
Correct display of Custom POIs within Tools -> Manage My Data -> Custom POI Sets when the file is saved on the storage card.
Correct a rare error that could cause the application to shutdown when downloading maps from MapSource.
Correct display for MapSource communication if the application is running in background mode.
Correct a rare error that could cancel a route calculation if two route calculations occur back-to-back quickly.
Correct a rare error that could cause the command bar to not be redisplayed when the application was not exited normally.
Correct default measurement settings for England.
Correct the non-display of a Garmin Online service if a service is not supported.
Correct the safety camera display of some unique camera points.
Correct the display of the north arrow on VGA devices.
Correct the display of direction indicators for the GPS Info page on VGA devices.
Correct a rare error that could cause the application to shutdown when a Contact contained specific information.
Correct a text display error that caused some letters to be clipped at the bottom edges.
Correct the display of traffic data for users in France.
Correct a rare error that could cause the application to shutdown if a turn preview window closes before showing the route recalculation message.
Correct the About page text that was being cutoff in some text languages.
Correct voice instructions to always speak all words ? some WM6 devices were skipping every other word.
Correct display of buttons, list items and message boxes for WQVA screens.

More Info:
Code:
http://www8.garmin.com/support/collection.jsp?product=010-00579-00

Download Instructions: All credits for the keygen go to JetMouse, as well as Lord Yuz and starix who helped with the creation of the keygen.
Code:
Installation procedure:

a) Start installation of 'GarminMobileXTforWindowsMobile_42020w.exe' from PC through ActiveSync. Select your Storage Card as destination. During the installation, files will be copied to your storage card. The files should appear in '\Storage Card\Garmin\Apps\WM'.
b) Install 'GarminMobileXTSupportFiles_4xxxx.exe' for voice files. In storage card
c) Install 'GarminMobileXTFreeBasemap_4xxxx.exe' for Garmin's base map. In storage card
d) Run GarminMobileXT and click "Connect to a Garmin GPS" go to 'setting\about' record the Unit ID and use keygen to create unlock key.
e) Save as sw.nl file.
f) Copy 'sw.unl' to '\Storage Card\Garmin'.


Rapidshare: http://rapidshare.com/files/213315919/garmin_mobile_xt.rar
4Share: http://www.4shared.com/file/39850879/56d0b283/garmin_mobile_xt.html

[KingTee]

Is this like the same version thats stickied? Does this work with internal GPS?

Thanks

[D/\SH]

Is this like the same version thats stickied? Does this work with internal GPS?

Thanks

no its not look at the build number

[wcked]

i test ran this and it is working well i must say props dash and the AUTHOR...lol

but i have to figure out about local city map. I will research more..if any body can assist that would be great.

[D/\SH]

i test ran this and it is working well i must say props dash and the AUTHOR...lol

but i have to figure out about local city map. I will research more..if any body can assist that would be great.

thanks for the test bro i was going to test for you guys today and this one seems a lil more stable than the last.

[Balkar]

You are not authorized to post any spam link (You need 5 or more post to post a link)

[D/\SH]

You are not authorized to post any spam link (You need 5 or more post to post a link)
you should be fine to post a link now since you have 5 posts... we do that to cut back on people spamming.

[MarkAtHome]

Installation procedure:

a) Start installation of 'GarminMobileXTforWindowsMobile_42020w.exe' from PC through ActiveSync. Select your Storage Card as destination. During the installation, files will be copied to your storage card. The files should appear in '\Storage Card\Garmin\Apps\WM'.
b) Install 'GarminMobileXTSupportFiles_4xxxx.exe' for voice files. In storage card
c) Install 'GarminMobileXTFreeBasemap_4xxxx.exe' for Garmin's base map. In storage card
d) Run GarminMobileXT and click "Connect to a Garmin GPS" go to 'setting\about' record the Unit ID and use keygen to create unlock key.
e) Save as sw.nl file.
f) Copy 'sw.unl' to '\Storage Card\Garmin'.
Hi Dash -- I've two quick questions for you:

1) Is Unit ID the same as Device ID or Card ID (will be installing to card)?
2) I've experimented a little with the keygen and don't see where to save as "sw.nl' -- am I to create this as a text file from scratch, and if so, can you show me what its contents should look like?

Thanks - your efforts are appreciated.

[wcked]

Hi Dash -- I've two quick questions for you:

1) Is Unit ID the same as Device ID or Card ID (will be installing to card)?
2) I've experimented a little with the keygen and don't see where to save as "sw.nl' -- am I to create this as a text file from scratch, and if so, can you show me what its contents should look like?

Thanks - your efforts are appreciated.

actually that was a typo you have to save it to sw.unl and put it in your garmin directory in your storage card .then take the card out wait 2 sec then do a soft reset. and boom you are set. to go

[MarkAtHome]

actually that was a typo you have to save it to sw.unl and put it in your garmin directory in your storage card .then take the card out wait 2 sec then do a soft reset. and boom you are set. to go
Hi wcked - typo affirmed. Thanks.

How is sw.unl created and what should its contents look like?

When navigating to Garmin's settings/about to get a Unit ID for the keygen utility, do I use the Device ID or Card ID as the Unit ID? <whew!>

[wcked]

Hi wcked - typo affirmed. Thanks.

How is sw.unl created and what should its contents look like?

When navigating to Garmin's settings/about to get a Unit ID for the keygen utility, do I use the Device ID or Card ID as the Unit ID? <whew!>

the way i did it was open you notepad copy and paste the serial to the notepad the save as"sw.unl", now go to your active synce open explore look for storage card then once you find garmin folder just put that sw.unl file inside the garmin folder...ok then you take the card out wait 2 sec then put it back in after that do a soft reset and you are good to go.also what you will be lookin for is unit id

[MarkAtHome]

the way i did it was open you notepad copy and paste the serial to the notepad the save as"sw.unl", now go to your active synce open explore look for storage card then once you find garmin folder just put that sw.unl file inside the garmin folder...ok then you take the card out wait 2 sec then put it back in after that do a soft reset and you are good to go.also what you will be lookin for is unit id
Well, so far no errors. Will not be going out until the morning, but will let you know how I make out.

What about the City Navigator North America NT 2008 key that I generated?

[Balkar]

Yeah, btw thanks coder for the info about that keygen... Also, my question earlier was how to i get the north american maps... do i get them on official garmin site or i get them off any torrent site...

Thanks

Balkar

[D/\SH]

Yeah, btw thanks coder for the info about that keygen... Also, my question earlier was how to i get the north american maps... do i get them on official garmin site or i get them off any torrent site...

Thanks

Balkar

torrent site will work we had smeone upload the files but you have to be a premium member and all to get to them so he is going to reupload the files soon i hope.... he has all of north america..

[Balkar]

Alright, me again, maybe a stupid question but i'm new to those thing especially that *UNL file...

How do i create it exactly... I open notepad, copy the keygen, hit save and as the file name i did put sw.unl and saved it. Now i get a file when i look in explorer that is called sw.unl.txt

Is that the right thing to do or i am doing it wrong

Thanks

[D/\SH]

Alright, me again, maybe a stupid question but i'm new to those thing especially that *UNL file...

How do i create it exactly... I open notepad, copy the keygen, hit save and as the file name i did put sw.unl and saved it. Now i get a file when i look in explorer that is called sw.unl.txt

Is that the right thing to do or i am doing it wrong

Thanks

yes because a word document saves as a .txt which stands for text file.

[MarkAtHome]

How do i create it exactly... I open notepad, copy the keygen, hit save and as the file name i did put sw.unl and saved it. Now i get a file when i look in explorer that is called sw.unl.txt
You now need to rename sw.unl.txt to sw.unl

[wcked]

Alright, me again, maybe a stupid question but i'm new to those thing especially that *UNL file...

How do i create it exactly... I open notepad, copy the keygen, hit save and as the file name i did put sw.unl and saved it. Now i get a file when i look in explorer that is called sw.unl.txt

Is that the right thing to do or i am doing it wrong

Thanks

remove the .txt and leave it as sw.unl so it should be sw.unl not sw.unl.txt

[Balkar]

Ok, I got this working so from the bottom of my heart to you 3, mark, wcked and dash, Thanks a WHOLE lot! I've been looking for this for like 3 months until i found this site... I'll refer all i can to here, this seems like a really great community!

Again, thanks! O and hitted all those thanks button :P

[Balkar]

I'll try to get a sucessful signal with my gps and i'll keep you gyuys updated with com port or other stuff...

Well actually, before i try this, do you know if its possible to sync a bluetooth gps and a htc touch with this software or it has to be a phone with a built in GPS absolutly...

[Will7272]

I signed up for a 2 month premium for megaupload so ppl can pull off maps of the US. The login and pass are in the other thread as well.

Login: Will7272
Pass: sprintpcs

Hope this helps.

[reebis44]

Wait...i don't get it. Now what exactly do i put in for Unit ID in keygen? All I see in "about" is Device ID and Card ID...

[D/\SH]

Wait...i don't get it. Now what exactly do i put in for Unit ID in keygen? All I see in "about" is Device ID and Card ID...

are you serious bro??? we just went through the whole thing in this thread nasd also in the read-me.

[D/\SH]

I signed up for a 2 month premium for megaupload so ppl can pull off maps of the US. The login and pass are in the other thread as well.

Login: Will7272
Pass: sprintpcs

Hope this helps.

thansk for this. this is for the american maps fo rthose that dont know. Go to this site and follow the instructions given.
http://jinxinlove.blogspot.com/2007/...on-garmin.html

I used the above linked app to get Garmin Mobile XT installed. You may have a different method or already have the program. If so, proceed to the next 2 downloads.
GARMIN1.rar (762.94 MB)
http://www.megaupload.com/?d=MI6L7MMT
GARMIN2.rar (677.81 MB)
http://www.megaupload.com/?d=A37R1CN9

Download the files from the links above and install the program. Install on PC only. This will install City Navigator North America 2008 nonNT.

Once you install, use the appropriate registry entry for your operating system before you launch the program. Connect Mogul using activesync. Once connected, launch the program you installed (MapSource). Click on Utilities and get your Unit ID. You will need to use this with your keygen. Launch the Keygen. Enter your Unit ID in space provided and click generate to get your GM XT device unlock code. On same keygen screen, look for Select Map Product. Scroll down and select custom map set. A small window will open asking you to input the Map ID code. Enter 243 in this field. This will unlock the detailed maps for the US and I believe Canada. Scroll or pan around to where you want to have detailed maps. Once you select or highlight an area, hit the send to device button and you're good to go. If you have any questions or problems, I'll do what I can to help. I have tested and use this on my Mogul and it works flawlessly.

[wcked]

thanks dash i had downloaded 15 files and the 12 file was corrupted i will try this one now...and get back to you guys

[reebis44]

are you serious bro??? we just went through the whole thing in this thread nasd also in the read-me.
Dead serious. i saw the question asked. i saw WHAT to do with the keygen generated key, and i get all that. But I don't see WHAT to put into keygen as the Unit ID in the first place. And I don't see a "read-me".

[Will7272]

These files shouldn't be corrupt but in the case that 1 or 2 of them are, I have a par set that will repair them. I'll keep checking to see how everybody is doing.

[MarkAtHome]

thansk for this. this is for the american maps fo rthose that dont know. Go to this site and follow the instructions given.
http://jinxinlove.blogspot.com/2007/...on-garmin.html
This URL doesn't seem valid. The "..." in the URL is the same in the actual shortcut - if you hover your mouse over that link, the URL doesn't expand, it includes the "...". Take a look at the webpage's source. http://www.anonym.to/?http://jinxinlove.blogspot.com is valid, though, but don't know where to go from there.

[Will7272]

This URL doesn't seem valid. The "..." in the URL is the same in the actual shortcut - if you hover your mouse over that link, the URL doesn't expand, it includes the "...". Take a look at the webpage's source. http://www.anonym.to/?http://jinxinlove.blogspot.com is valid, though, but don't know where to go from there.

Try this one.

http://jinxinlove.blogspot.com/2007/12/garmin-mobile-xt-with-non-garmin.html

[MarkAtHome]

Try this one.

http://jinxinlove.blogspot.com/2007/12/garmin-mobile-xt-with-non-garmin.html
Ah, the missing link! Thanks, Will7272. I had no problem installing the latest Garmin Mobile XT (v4.20.20wp), but thought that your two RAR files would provide me with the detailed US maps I had (incorrectly?) presumed to be missing. The above jinxinlove link doesn't shed any light as to what to do with the Mapsource you provided (and I successfully installed onto my PC). How do I get it to my phones card? BTW, jinx' files are of an older version of the Garmin Mobile XT software.

[wcked]

These files shouldn't be corrupt but in the case that 1 or 2 of them are, I have a par set that will repair them. I'll keep checking to see how everybody is doing.


i wasn't talking about the mega files that was corrupted. It was a set of 15 files that i had to download from another site and the 12th rar files was corrupted, so i will download that dash posted and see how it work out

[Will7272]

Connect your device using activesync.
Run Mapsource.
Click on Utilities---->Get Unit ID
Once you get your Unit ID, place it in the top line of the Keygen.
Get your GM XT Device Unlock Code and copy to cliwckedoard.
Go to Utilities and paste that 25 digit code into Mapsource.
On same keygen screen, look for Select Map Product.
Scroll down and select custom map set. A small window will open asking you to input the Map ID code.
Enter 243 in this field.
Get the map unlock code and enter that 25 digit code into Mapsource the same way you did your GM XT Device Unlock Code
This will unlock the detailed maps for the US and I believe Canada. Scroll or pan around to where you want to have detailed maps. Once you select or highlight an area, hit the send to device button and you're good to go. If you have any questions or problems, I'll do what I can to help. I have tested and use this on my Mogul and it works flawlessly.

Ah, the missing link! Thanks, Will7272. I had no problem installing the latest Garmin Mobile XT (v4.20.20wp), but thought that your two RAR files would provide me with the detailed US maps I had (incorrectly?) presumed to be missing. The above jinxinlove link doesn't shed any light as to what to do with the Mapsource you provided (and I successfully installed onto my PC). How do I get it to my phones card? BTW, jinx' files are of an older version of the Garmin Mobile XT software.

[MarkAtHome]

Connect your device using activesync.
Run Mapsource.
Click on Utilities---->Get Unit ID
Once you get your Unit ID, place it in the top line of the Keygen.
Get your GM XT Device Unlock Code and copy to cliwckedoard.
Go to Utilities and paste that 25 digit code into Mapsource.
On same keygen screen, look for Select Map Product.
Scroll down and select custom map set. A small window will open asking you to input the Map ID code.
Enter 243 in this field.
Get the map unlock code and enter that 25 digit code into Mapsource the same way you did your GM XT Device Unlock Code
This will unlock the detailed maps for the US and I believe Canada. Scroll or pan around to where you want to have detailed maps. Once you select or highlight an area, hit the send to device button and you're good to go. If you have any questions or problems, I'll do what I can to help. I have tested and use this on my Mogul and it works flawlessly.
I am never prompted for a Map ID code, so I can not enter 243 in this field. After getting my GM XT unlock code, etc., I select the map product City Navigator North America NT 2008, but no window opens. I only have the option to generate a key. FWIW, I am using keygen v1.3.

Update: I was choosing the complete North America map product and didn't select custom. Will try again. Thanks.

2nd Update: Not mentioned was whether to register the product -- in all cases, I opted not to. Anyway, I selected the lower portion of Canada and all of the continental U.S., clicked on the send to device button, and received an error, asking that I copy the log and send it to Garmin (which I didn't). The log is attached.

[Will7272]

Make sure you select Custom Map Set. I've never used Mapsource until I downloaded it. Play around with it and you'll get it working exactly the way you want.
I am never prompted for a Map ID code, so I can not enter 243 in this field. After getting my GM XT unlock code, etc., I select the map product City Navigator North America NT 2008, but no window opens. I only have the option to generate a key. FWIW, I am using keygen v1.3.

Update: I was choosing the complete North America map product and didn't select custom. Will try again. Thanks.

[Balkar]

thansk for this. this is for the american maps fo rthose that dont know. Go to this site and follow the instructions given.
http://jinxinlove.blogspot.com/2007/...on-garmin.html

I used the above linked app to get Garmin Mobile XT installed. You may have a different method or already have the program. If so, proceed to the next 2 downloads.
GARMIN1.rar (762.94 MB)
http://www.megaupload.com/?d=MI6L7MMT
GARMIN2.rar (677.81 MB)
http://www.megaupload.com/?d=A37R1CN9

Download the files from the links above and install the program. Install on PC only. This will install City Navigator North America 2008 nonNT.

Once you install, use the appropriate registry entry for your operating system before you launch the program. Connect Mogul using activesync. Once connected, launch the program you installed (MapSource). Click on Utilities and get your Unit ID. You will need to use this with your keygen. Launch the Keygen. Enter your Unit ID in space provided and click generate to get your GM XT device unlock code. On same keygen screen, look for Select Map Product. Scroll down and select custom map set. A small window will open asking you to input the Map ID code. Enter 243 in this field. This will unlock the detailed maps for the US and I believe Canada. Scroll or pan around to where you want to have detailed maps. Once you select or highlight an area, hit the send to device button and you're good to go. If you have any questions or problems, I'll do what I can to help. I have tested and use this on my Mogul and it works flawlessly.

Hey dash, those 2 last links, i guess they are the maps right? I can only download the second one for some reason... first one was deleted, were they boh the same thing? Also, will they install with the version you gave us the link to in this thread(The first post :P)

Thanks

Balkar

[Will7272]

Hey dash, those 2 last links, i guess they are the maps right? I can only download the second one for some reason... first one was deleted, were they boh the same thing? Also, will they install with the version you gave us the link to in this thread(The first post :P)

Thanks

Balkar

Yes. This program is the Mapsource program you'll need to get US maps. It will allow you to unlock maps in V4.20.20wp as well as the older version V4.10.40w. I just checked the first link and the download worked for me. Try checking again.

[Will7272]

I never selected the entire continental US. I did the entire east coast and some of the mid US. Try selecting a smaller area to test or break the areas up that you want to transfer. Also, make sure that you use the correct registry file for mapsource for either XP or Vista. That may cause an error if not done.

I am never prompted for a Map ID code, so I can not enter 243 in this field. After getting my GM XT unlock code, etc., I select the map product City Navigator North America NT 2008, but no window opens. I only have the option to generate a key. FWIW, I am using keygen v1.3.

Update: I was choosing the complete North America map product and didn't select custom. Will try again. Thanks.

2nd Update: Not mentioned was whether to register the product -- in all cases, I opted not to. Anyway, I selected the lower portion of Canada and all of the continental U.S., clicked on the send to device button, and received an error, asking that I copy the log and send it to Garmin (which I didn't). The log is attached.

[wcked]

lol..i feel like a noob map source install... having trouble setting maps east side to mobile.

there should be a detail tutorial on it..:Flush:

[Balkar]

But are the first and second file the same thing? Or do i need both? Sorry i have a slow connection lol downloading at 60kb

Thanks

[Will7272]

But are the first and second file the same thing? Or do i need both? Sorry i have a slow connection lol downloading at 60kb

Thanks

You need both

[Will7272]

lol..i feel like a noob map source install... having trouble setting maps east side to mobile.

there should be a detail tutorial on it..:Flush:

There is a map select tool near the toolbar. It's shaped like a polygon. Mine is located right under the help menu. Select that tool then select the state in which you live in. Send those files over to phone. Run Garmin on phone with GPS signal to test. It should work. I've done it on 4 phones so far and no probs.

[D/\SH]

There is a map select tool near the toolbar. It's shaped like a polygon. Mine is located right under the help menu. Select that tool then select the state in which you live in. Send those files over to phone. Run Garmin on phone with GPS signal to test. It should work. I've done it on 4 phones so far and no probs.

thanks for all the help bro you got this down lol.... 4 phones!!! very nice at least someone is getting use out of these apps besides me.... i was using garmin for a couple weeks before anyones decided to give it a shot lol..... keep up the great work.

Thanks:
D/\SH

[MarkAtHome]

I never selected the entire continental US. I did the entire east coast and some of the mid US. Try selecting a smaller area to test or break the areas up that you want to transfer. Also, make sure that you use the correct registry file for mapsource for either XP or Vista. That may cause an error if not done.
I used the non-64bit reg version (not specifically XP-labeled) for Vista (32-bit). I just tried selecting Albany, NY (not even the whole state), and see:

[Balkar]

Ok so i got mapsource, both pieces, the 3 .zip with exe inside that i installed form my pc to my phone and the keygen.

I sucessfully managed to register Garmin.

Now, what do i do next with what i got... DO i neet the NT or non NT maps... Again, in advance, thanks

[Will7272]

Connect your device using activesync.
Run Mapsource.
Click on Utilities---->Get Unit ID
Once you get your Unit ID, place it in the top line of the Keygen.
Get your GM XT Device Unlock Code and copy to cliwckedoard.
Go to Utilities and paste that 25 digit code into Mapsource.
On same keygen screen, look for Select Map Product.
Scroll down and select custom map set. A small window will open asking you to input the Map ID code.
Enter 243 in this field.
Get the map unlock code and enter that 25 digit code into Mapsource the same way you did your GM XT Device Unlock Code
This will unlock the detailed maps for the US and I believe Canada.

[Will7272]

I used the non-64bit reg version (not specifically XP-labeled) for Vista (32-bit). I just tried selecting Albany, NY (not even the whole state), and see:
Mark it may be something with Vista. I'll check around and see what I can find might be the problem.

Edit: Mark, download this patch from Garmin's website and see if that fixes the problem with Vista. Several people have had the same problem you are having with Vista.
http://www8.garmin.com/support/download_details.jsp?id=209

Read up on it to make sure the problems this patch fixes are the problems you're having.

[Balkar]

Hey will, is map source within the 2 rar files i downloaded, i found a setup.exe... is that it?

[Will7272]

You'll need to place the contents of the 2 files you downloaded into one folder. (Extract them to the same folder.) Then extract the entire program. Once you do that, you'll see the exe to use to install.

[Balkar]

Alright guys here is my head up installing this on the htc touch. It works, i can sync it with a external bluetooth gps. Gotta use com port 4, Follow Will instruction in this thread and u'll get it. Thanks a whole lot man, really appreciate, i just come back from a test drive with it :P Works wonder

[Will7272]

Alright guys here is my head up installing this on the htc touch. It works, i can sync it with a external bluetooth gps. Gotta use com port 4, Follow Will instruction in this thread and u'll get it. Thanks a whole lot man, really appreciate, i just come back from a test drive with it :P Works wonder

Cool man. Glad I was able to help out.

[Balkar]

Hey one last question, Isnt this program suposed to say the street instruction as follow : in 200 meters, turn right on *Say out loud the street name). Because i did put the language in french and it doesnt mention the name of the street i gotta turn on. DO you guys, when set in english, ear the name?

[MarkAtHome]

Mark it may be something with Vista. I'll check around and see what I can find might be the problem.

Edit: Mark, download this patch from Garmin's website and see if that fixes the problem with Vista. Several people have had the same problem you are having with Vista.
http://www8.garmin.com/support/download_details.jsp?id=209

Read up on it to make sure the problems this patch fixes are the problems you're having.
Will do Will7272. Thanks. BTW, the Garmin Mobile XT for WindowsMobile V4.20.20wp is not usable without your 2 RARs? What does the City Navigator North America package add? The reason I ask is everything seemed to install before trying to add the maps! <hehe> Go figure. Maybe I should just follow the yellow brick road...

[Will7272]

It works with the new Mobile XT. I'm using it now.

[kgphat25]

Awesome stuff guys, just one thing when I try to use the login and pass for megaup that Will7272 provided it tells me wrong password. Just a heads up, thanks for this awesome program btw :smile_mini2:

[D/\SH]

Awesome stuff guys, just one thing when I try to use the login and pass for megaup that Will7272 provided it tells me wrong password. Just a heads up, thanks for this awesome program btw :smile_mini2:

someone prolly was a dumbass and tried to change it or you need to copy and paste and see if that works.... also to anyone who thinks that got a free account that did that the joes on you he can get it sent to him and change it back smarts lol....

[Will7272]

Awesome stuff guys, just one thing when I try to use the login and pass for megaup that Will7272 provided it tells me wrong password. Just a heads up, thanks for this awesome program btw :smile_mini2:


I reset the password. I knew some idiot would try to change the password. I'll pm u with the new pass.

[wcked]

I reset the password. I knew some idiot would try to change the password.

see what happens when you help people out..f**k them now let them pay for it....thanks will for your support here...

[Will7272]

No problem man. Just trying to give back instead of take take take all the time. You guys do a good job here. Keep up the good work.

[D/\SH]

No problem man. Just trying to give back instead of take take take all the time. You guys do a good job here. Keep up the good work.

thanks and will do you do the same!!!! :yahoo:

[MarkAtHome]

It works with the new Mobile XT. I'm using it now.
Hi Will7272 - I should have some extra time to try this again. During the installation, if I recall, you're asked whether you wish to register -- should you?

[seanpmi]

Thanks much for the program. Now, I need MapSource to get detailed maps, but cannot get it via MegaUpload. Please email me the login info so that I may get it. Thanks :smile_mini2:

[xavier184]

Has anybody tried installing this with having the earlier version, V4.1, already installed? Will it recognize it and just upgrade your current version?

[D/\SH]

Has anybody tried installing this with having the earlier version, V4.1, already installed? Will it recognize it and just upgrade your current version?

ummmmm i tihnk you have to reinstall over the old version and than it will prolly keep most of the settings. but go through to make sure and the rest should be ok.

[nyclegend20]

I signed up for a 2 month premium for megaupload so ppl can pull off maps of the US. The login and pass are in the other thread as well.

Login: Will7272
Pass: sprintpcs

Hope this helps.

this does not work
says invalid user

[D/\SH]

this does not work
says invalid user

didnt you read the posts throughout the thread. some asshole decided to change the password so you have to pm will for the asccount username and password unless someone can post up a mirror on megashares or summtin.

[Sapient]

I tired this and then uninstalled it. Anyone know how to get rid of the "Do you want to install Garmin" message that pops up when I reset my phone?

[reebis44]

I tired this and then uninstalled it. Anyone know how to get rid of the "Do you want to install Garmin" message that pops up when I reset my phone?

Make sure you got rid of all Garmin associated files on your device and on your storage card. (Except, of course the original zipped file, if u want to keep it for later.)

[Will7272]

I tired this and then uninstalled it. Anyone know how to get rid of the "Do you want to install Garmin" message that pops up when I reset my phone?

Delete folder 2577 from your storage card

[Sapient]

Thanks. I was not sure where that folder came from, and was afraid to touch it.

[slick78]

alright, i installed the program and i am trying to follow the steps but i dont see the utilities where its says to get id # for keygen could someone help me out

[D/\SH]

alright, i installed the program and i am trying to follow the steps but i dont see the utilities where its says to get id # for keygen could someone help me out

did you read through the thread it is all in there....... all you did is where it says register, type in the number that the keygen spits out like ant other program.

[slick78]

ok i got as far as the map unlock code i have that now im not sure where you put it. does it go in the garmen folder in storage card like the other if so what do you save it as. the device unlock was saved as sw.unl so what would the map unlock be saved as?


Connect your device using activesync.
Run Mapsource.
Click on Utilities---->Get Unit ID
Once you get your Unit ID, place it in the top line of the Keygen.
Get your GM XT Device Unlock Code and copy to cliwckedoard.
Go to Utilities and paste that 25 digit code into Mapsource.
On same keygen screen, look for Select Map Product.
Scroll down and select custom map set. A small window will open asking you to input the Map ID code.
Enter 243 in this field.
Get the map unlock code and enter that 25 digit code into Mapsource the same way you did your GM XT Device Unlock Code
This will unlock the detailed maps for the US and I believe Canada. Scroll or pan around to where you want to have detailed maps. Once you select or highlight an area, hit the send to device button and you're good to go. If you have any questions or problems, I'll do what I can to help. I have tested and use this on my Mogul and it works flawlessly.

[slick78]

never mind my last post i finally got everything worked out, but thanks for all that helped w/this

[D/\SH]

never mind my last post i finally got everything worked out, but thanks for all that helped w/this

np bro glad that you got it to work for you.

[TonyStyle]

can't get this either i tried generating the key then copy it to the correct location .. i still don't get it can someone please explain this better .

[D/\SH]

can't get this either i tried generating the key then copy it to the correct location .. i still don't get it can someone please explain this better .

read through the thread completeyl. everything that you need has been discussed throughout the whole threa.d... try starting from the beginning.

[slick78]

can someone give some advice, i am trying to upload some more maps to my phone from mapsource but they are not transfering now. when i did the setup the first time i didn't have a problem but now i get a messege saying class does not exist? alsio, i was wondering if i ran the software update do you think that would help and will the maps stay unlocked if i ran an update on mapsource

[D/\SH]

can someone give some advice, i am trying to upload some more maps to my phone from mapsource but they are not transfering now. when i did the setup the first time i didn't have a problem but now i get a messege saying class does not exist? alsio, i was wondering if i ran the software update do you think that would help and will the maps stay unlocked if i ran an update on mapsource

usually you cant update since it ruins the crack and all and makes it unregistered. no clue why thta it would be doing it for you. i use telenav through sprint so cant be much of a help to ya guyz.

[twotones41]

umm am i suppose to have an actual garmin device to complete the installion for the garmin to work on the mogul i went to connect to a garmin gps but it never never connected to anything.

[D/\SH]

umm am i suppose to have an actual garmin device to complete the installion for the garmin to work on the mogul i went to connect to a garmin gps but it never never connected to anything.

no and did you read through the thread and look through your settings??? we need more info on what is going on and the info in the thread explains a lot of troubleshooting so i would recomend reading it since we have it there for a reason

[Ricky Bobby]

Ok i have read this forum front thread front to back and the other forum for garmin and i dunno what im doing wrong. I did the key gen pulled sd card and did soft reset. I have the sw.nl in my garmin folder. there is two folders in there. Apps and eula. But its still poping up that purchase, free trial, product key, connect screen. any help plz? I know its something stupid.

[mwiener1]

Ok i have read this forum front thread front to back and the other forum for garmin and i dunno what im doing wrong. I did the key gen pulled sd card and did soft reset. I have the sw.nl in my garmin folder. there is two folders in there. Apps and eula. But its still poping up that purchase, free trial, product key, connect screen. any help plz? I know its something stupid.

from the first couple of posts:

" actually that was a typo you have to save it to sw.unl and put it in your garmin directory in your storage card .then take the card out wait 2 sec then do a soft reset. and boom you are set. to go "

--------- New Post Merged on 24/3/2009 at 06:15:33 --------

any way to get the links up and running?

just got the gps working on my phone and looking to put on garmin mobile xt 5 | but need a previous version first.

[kaos]

from the first couple of posts:

" actually that was a typo you have to save it to sw.unl and put it in your garmin directory in your storage card .then take the card out wait 2 sec then do a soft reset. and boom you are set. to go "

--------- New Post Merged on 24/3/2009 at 06:15:33 --------

any way to get the links up and running?

just got the gps working on my phone and looking to put on garmin mobile xt 5 | but need a previous version first.

you do not need a previous version bro...install 5

[dansoftcore]

Well I don't have the time at the moment to transfer the file I downloaded for the maps, but for the maps from say city navigator all you need is the .img file?

[kaos]

Well I don't have the time at the moment to transfer the file I downloaded for the maps, but for the maps from say city navigator all you need is the .img file?

you need to download them..image will not do. it is device specific id. if its from apro to a pro ya it will work..but ive sem some not work..i posted the latest last week 2009-11 ...north america maps

[dansoftcore]

you need to download them..image will not do. it is device specific id. if its from apro to a pro ya it will work..but ive sem some not work..i posted the latest last week 2009-11 ...north america maps

I used to have an app that would let me pic the maps I wanted, but everything I find now seems to be the actual image

[kaos]

I used to have an app that would let me pic the maps I wanted, but everything I find now seems to be the actual image

no not everything... take the time and download the new maps for the second time. it has the program to do that as well as a keygen. the program is called map source.

[dixiedevil]

ok i have at&t tilt... i installed everything fine but for some reason it wont connect to the internal GPS ... how do i fix this or can i fix this?

[jimmin]

Hi wcked - typo affirmed. Thanks.

How is sw.unl created and what should its contents look like?

When navigating to Garmin's settings/about to get a Unit ID for the keygen utility, do I use the Device ID or Card ID as the Unit ID? <whew!>

Well I used the device ID

Then for The .unl file
1)use notepad
2) copy the code the keygen gave you
3)paste it in notepad
4) click file and save as
5) where it says file tyep: put in sw.unl
6) where it says: save as type- click it and make sure it says all files
7)click save and move it to Storage card/Garmin
Then your done
Someone correct me if im wrong?

[kaos]

Well I used the device ID

Then for The .unl file
1)use notepad
2) copy the code the keygen gave you
3)paste it in notepad
4) click file and save as
5) where it says file tyep: put in sw.unl
6) where it says: save as type- click it and make sure it says all files
7)click save and move it to Storage card/Garmin
Then your done
Someone correct me if im wrong?

in notepad dont save as a txt... select all files option for it to save correct as a unl.

[DaveAz]

Ok i have read this forum front thread front to back and the other forum for garmin and i dunno what im doing wrong. I did the key gen pulled sd card and did soft reset. I have the sw.nl in my garmin folder. there is two folders in there. Apps and eula. But its still poping up that purchase, free trial, product key, connect screen. any help plz? I know its something stupid.

I am having same issue...I've read through the thread, saved the file correctly in the Garmin folder, pulled card, soft reset, then reinsert card. What did I do wrong?

I'm assuming that because this is not activated, that's why it won't find my internal GPS?


Thanks,
Dave

[kaos]

I am having same issue...I've read through the thread, saved the file correctly in the Garmin folder, pulled card, soft reset, then reinsert card. What did I do wrong?

I'm assuming that because this is not activated, that's why it won't find my internal GPS?


Thanks,
Dave
no it will still work. the crack is for paid version with no updates. But everything works. Updates can be installed over to this. what device do you have a issue on?The Mogul? What carrier? What rom you running?radio?

[DaveAz]

no it will still work. the crack is for paid version with no updates. But everything works. Updates can be installed over to this. what device do you have a issue on?The Mogul? What carrier? What rom you running?radio?

I have the Touch Pro. RSTG Custom Rom -=- Rhodium_v1D v3.R1d.15 FuzeBerry II rom, stock radio. GPS works great w/ everything else. Do I have to enter the eight digit code to activate on the phone? If so, where do I get that?

[kaos]

I have the Touch Pro. RSTG Custom Rom -=- Rhodium_v1D v3.R1d.15 FuzeBerry II rom, stock radio. GPS works great w/ everything else. Do I have to enter the eight digit code to activate on the phone? If so, where do I get that?

If you haven't added the swl file like it says in first post.I would suggest doing that.

[DaveAz]

If you haven't added the swl file like it says in first post.I would suggest doing that.

swl? didn't see anything about swl...did you mean the sw.unl file? I got that saved correctly in the Garmin folder. Not sure I had it right at first, so would I need to delete everything and re-do it?

[kaos]

swl? didn't see anything about swl...did you mean the sw.unl file? I got that saved correctly in the Garmin folder. Not sure I had it right at first, so would I need to delete everything and re-do it?
if it shows as a .txt it wasnt done right. if so then change to com 4

[DaveAz]

if it shows as a .txt it wasnt done right. if so then change to com 4

I'm certain it is not a .txt file. As far as the COM4, is that program or hardware?

[D/\SH]

I'm certain it is not a .txt file. As far as the COM4, is that program or hardware?

thats your port for the gps.

[DaveAz]

thats your port for the gps.

Ya, but the phone has a setting to change to com4 for either program or hardware tabs. Which one needs to be set to com4? I thought it was program that was to be set, but it's been a while since I read it, and I believe it was for my old phone I read it for.

BTW, I've tried setting it both ways w/ no luck. I just want to make sure I have it set right before trying something else.
Thanks,
Dave

[erick10]

iI need help guys. When I try to Generate my key, it gives me an error saying "The Card ID you entered is either invalid or incomplete. Please enter a valid Card ID and try again!" The thing is that im using the right Device ID. Mine says its HTC44 but when I generate it, it gives me this error. Im lost, can you guys help me.