ok, Getting sooo frustrated.....

[nooganator]

Ok so heres the scoop. Im on a Bell network for my phone, and yesterday i installed D2D
2.10 rom update with radio v3.27.00....

Soo first, I Can boot into WM 6.1 but it seems to restart on me every few minutes. Secondly, I cant make any phone calls either, it says my phone is unreconized... What do I do???

Is there a Rom that will set my phone back to the factory Bell settings in case I have to call them to restart my phone? Im soo frustrated...

Thanks in advance...

[D/\SH]

Ok so heres the scoop. Im on a Bell network for my phone, and yesterday i installed D2D
2.10 rom update with radio v3.27.00....

Soo first, I Can boot into WM 6.1 but it seems to restart on me every few minutes. Secondly, I cant make any phone calls either, it says my phone is unreconized... What do I do???

Is there a Rom that will set my phone back to the factory Bell settings in case I have to call them to restart my phone? Im soo frustrated...

Thanks in advance...

well as the threads say you need to write down your msl number so you can reactvate. call bell and tell them you need to activate your phone and test before you hang up with them by calling voicemail and seeing if it connects. also tell them that you notice themsl is gone if it doesnt (dont mention right away) and than they will give you that if the first doesnt work...... and bell has released rom updates yo can go to www.htc.com toget those but wil need to follow the same steps as above.

[nooganator]

ok, i just looked on the htc site and if you look there isnt a rom... what should i do?

[D/\SH]

ok, i just looked on the htc site and if you look there isnt a rom... what should i do?

search google bro peole have done a dump of this rom ad has been updates check alltel.com or google and you will find..... and it should be oon the htc site. actually straight from the htc site bro heres the link: http://www.america.htc.com/support/ppc6800/software-downloads.html

[nooganator]

so it is ok for me to use the alltel rom on my bell phone?

[D/\SH]

so it is ok for me to use the alltel rom on my bell phone?

my bad thought you had alltel you can technically use any rom after you unlock the phone... i would rcomend using the 6.1 riom made by no2chem... called nuerm 2.0

[nooganator]

hey, i got nurem, but when i started the ruu i got error 262, it went to copy to my phone but hung at 0%...


Btw thanks for helping, im totally lost and confused.

[kaos]

did you unlock your phone.

[nooganator]

quite honestly, ive done soo much i dont even know wtf is going on anymore... can i get directions step by step to check all this stuff?
\\thanks

[kaos]

put your phone in bootloader press and hold the camera & power button.While doing this insert the stylus in the reset hole located by the sd card slot on the bottom right hand side of your device.This will put mogul in bootloader...tell me what it says. exactly

[nooganator]

yup in there now, all i see is the red green blue line, connected via usb and the text is TITA100
SPL-1.06.0000
CPLD-9

[kaos]

your phone is still locked you need to unlock
ftp://ppcgeeks:ezupload@up.ppcgeeks.com/Titan/Users/ImCoKeMaN/roms/Hard-SPL-MFG.exe
run that after it unlocks it will go back to 3 color screen... it should say 2.40 olipro then its unlocked....then just run ruu... dont take it back like that it voids your warranty...there is a relocker though...after you do that its hard to tell...

[nooganator]

ight! progress!

TITA100 MFG
SPL-2.40.OLIPRO
CPLD-9


now I also have the no2chem here, do i take the nbh file into my ruu file and run it now?

[nooganator]

ok, im installing the no2chem rom... What do I do about my phone service though? when i go to the phone, and try to dial out, i get a msg on my phone saying its not reconized on the network... Should i call the tech support line? i know all of this voids warranties and what not...

[kaos]

you have your msl? if not just call them tell em your phone died or make up something tell them you wanna set it up..they will tell you msl code...dont mention its unlocked or any of that.let em think its all normal. then reenter you mdn and msi.You lost you settings..

[nooganator]

ok.. one more stupid question.. when i call and get this info, where do i input it?

Last stupid question as long as this works, i promise

[kaos]

on dialer dial ##what ever digits your msl is#
this open up epst settings
select edit out of 3 choices. edit view end are the choices
your mdn and msid will show mdn is your phone number with area code.msid is sometimes the same....sometimes different

[nooganator]

:yahoo:

Sweet everything worked great, the guy didnt even care on the phone when i was talking to him!

Thanks so much for hleping i thoguht i was going to die~

[kaos]

your welcome remember to use the thanks button under the posts you like.

[BiG JeW]

Im trying to put 5048 on mine. bootloader is says TITA100 SPL-1.06.0000 CPLD-9!! what do i need to do?

[D/\SH]

Im trying to put 5048 on mine. bootloader is says TITA100 SPL-1.06.0000 CPLD-9!! what do i need to do?

please read through the 6.1 thread and look in the first post it gives you the link to the titan unlocker you need to run that to get the bootloader unlocked and have th ability to run custom roms. Thanks and heres the link: (the unlocke is included just use that.) http://rapidshare.com/files/88054092/WM6.1.zip.html