ICube For The Mogul

[D/\SH]

And for all you Mogul owners who want some iCube action, here's what you do:

Install this cab:

http://rapidshare.com/files/75947199/HTCCube_FTouchFlo_TFloCubeCtrlv110_Config-xplode.cab

Soft reset, make sure the Touch Flo Cube is Working, then install the next rapidshare link and install the cab but please backup your phone before doing this. also the video is attached below so you can see what it looks like also if you havent seen this before.

http://rapidshare.com/files/76500889/iCube4Mogul.zip.html

http://www.youtube.com/watch?v=sCQ2MVyFULc

[Mandingo]

you first link ...doesn't work.

[D/\SH]

you first link ...doesn't work.

alright sorry bout that damn rapidshare and snitches for taking that off lol. aight i got it re-upped for you.

[lookin4memarbles]

great stuff! can you tell me, or show me how how to asighn a shortcut? most are allready done for me, but there are a few that are not. that would be a helpfull video to all thanks again..

[D/\SH]

just google the program and say shortcut and it will spit it out for you and you have to do registry edits to be able to switch them.

[lookin4memarbles]

hey there how and were do i get the sports ticker? been looking forever lol. and allso do we have slingplayer? thanks allot.

[D/\SH]

hey there how and were do i get the sports ticker? been looking forever lol. and allso do we have slingplayer? thanks allot.

this is not the correct thread for asking questions like that use the local search tab under the pm area to search infraction given to you.

[jayjay2714]

After I follow your directions I get a screen with alot of add bottons than if I press something it say's cannot read existing settings is htc touchflo installed? What do I do?

[D/\SH]

you need to download the cube first from the first link the second link is just a skin and buttons for the link.

[jayjay2714]

you need to download the cube first from the first link the second link is just a skin and buttons for the link.

I downloaded both. The first one first than soft reset than the secoind one! It worked alil I pulled it up but it had no bottons and it i touched the screen the whole thigs disapeared.

[D/\SH]

I downloaded both. The first one first than soft reset than the secoind one! It worked alil I pulled it up but it had no bottons and it i touched the screen the whole thigs disapeared.

ive never heard of that happening before..... it worked fine on mine. what i would try to do is install but the apps again and see what happens.

[jayjay2714]

it works now thanks alot

[D/\SH]

it works now thanks alot

glad to hear it and no problem bro enjoy the icube and the magic of touchflo on your mogul... you will love it for sure..... to bad you didnt have more memory like the touch i run lol...

[thegameksk]

This doesn't work on my Mogul. I installed/soft reset/uninstalled and nothing. I keep sliding my finger up but nothing happens. Any ideas?

[D/\SH]

This doesn't work on my Mogul. I installed/soft reset/uninstalled and nothing. I keep sliding my finger up but nothing happens. Any ideas?

it does work for many people i have viideos to prove bro. did you install both the cab files from the first post onto your phone and than soft reset.

[mwrood]

I installed this icube and I'm having two problems. 1) whenever I try to unlock the slide2unlock it sometimes brings up the cube 2)whenever I try to realign the screen my phone freezes up and all I can do is a soft reset.

[D/\SH]

I installed this icube and I'm having two problems. 1) whenever I try to unlock the slide2unlock it sometimes brings up the cube 2)whenever I try to realign the screen my phone freezes up and all I can do is a soft reset.

ok you only have to post once i already answered your same questions in a different thread. only warning on the double posting. slide2unlock that is a problem with the 2 programs since the cube wasnt ever meant to be on the mogul unless you are using the flashlight version than you can out it on the exclude list. and for the other i dont know what to tell you.... prolly s2u also but seriously why the big deal on that i only allign my screen once and that is when i do a hard reset or flash my rom.

[BiG JeW]

Whats up? i am trying to config the cube. i got the 3 sided one done but the iphone cube links need to be tweaked. How can i do it? Thanks

[D/\SH]

Whats up? i am trying to config the cube. i got the 3 sided one done but the iphone cube links need to be tweaked. How can i do it? Thanks

use cube config 4.1

[BiG JeW]

worked like a charm thank u

[RStarkey]

I installed bith links, is pretty cool, thanks for the cool stuff. However some of my buttons don't work. For example there is a button for live search which I have installed but it is installed on my storage card. Do I need to change the link? I do not know how to change the registry.

[D/\SH]

worked like a charm thank u

no problem bro glad to help and and have fun with that

[RStarkey]

I installed the links they both work. I also installed the xm program. ever since I'm having trouble getting on the web no matter what program I use. Any sugestions

[D/\SH]

I installed the links they both work. I also installed the xm program. ever since I'm having trouble getting on the web no matter what program I use. Any sugestions

programs wont be having problems with the web or causing hat should i say. are you sure that you are in a good service area. and how are you trying to access the net, through the cube ir the start menu?(even though it will work through both.) have you tried a sift reset??? and also what rom are you using???? if all the above fails go to start/settings/phone/services tab/ internet/ than click get settings and wait for it to get done.

[RStarkey]

programs wont be having problems with the web or causing hat should i say. are you sure that you are in a good service area. and how are you trying to access the net, through the cube ir the start menu?(even though it will work through both.) have you tried a sift reset??? and also what rom are you using???? if all the above fails go to start/settings/phone/services tab/ internet/ than click get settings and wait for it to get done.
The web is just running much slower since i made the changes no matter what program is accessing the web. Yahoo Go, Atvango, msn, IE, so on. I have not upgraded to reva or win 6.1 I want to, but not sure I know enough. I thought I knew a lot until I got on this website. LOL. I have been waiting since July for the upgrade, you know how that's been

[BiG JeW]

I can agree. Every app runs slow after i installed it. I am running Rom 2.17. could that be the problem?

[D/\SH]

I can agree. Every app runs slow after i installed it. I am running Rom 2.17. could that be the problem?

have you two tried to overclock your phone., no matter what you do when you install anything on the phne will slow it down in the long run. but try to overclock and go to the rev or the 6.1 will speed it up a lil overall even withthe apps installed.

[BiG JeW]

do you reccomend overclocking to 520Mhz or 624Mhz. don't wanna ruin it.!! Thanks

[Tigerz]

yes i do but it may totally melt your phone and Wckediden is not in any way responsible but i over clock mine to 624 and its fast

[D/\SH]

yes i do but it may totally melt your phone and Wckediden is not in any way responsible but i over clock mine to 624 and its fast

i do 624 without problems.

[AL_CAPONE_X3]

i got this installed but my only question is how do i edit the cube where i can make most the links that dont work actually work for me and go somewhere. you know the buttons.

[D/\SH]

i got this installed but my only question is how do i edit the cube where i can make most the links that dont work actually work for me and go somewhere. you know the buttons.

ummm been discussed already bro you know to search lol..... cube config 4.1 found here: https://www.wckediden.com/showthread.php?t=143021&highlight=cube+config

[AL_CAPONE_X3]

ummm been discussed already bro you know to search lol..... cube config 4.1 found here: https://www.wckediden.com/showthread.php?t=143021&highlight=cube+config

ya i know man. hahaha my bad. i couldnt find anything i was trying to use sktools to make it work but couldnt. i was probably doing something wrong. but thanks.

[dcshoeco024]

what do u mean by back up your device? After you install this, if i get tired of it can I take it off and have it return to its original settings? Thanks

[D/\SH]

what do u mean by back up your device? After you install this, if i get tired of it can I take it off and have it return to its original settings? Thanks

yes but when installing something big like this it is always smart to backup and be safe. a backup makes an exe file on your phone of everything at the moment, programs, games, registry,contacts, etc,etc....... than if something goes wrong all you need to do is click on that restore from the storage card and it willl bring it back to the state of that backup.... just like go back on your computer.

[dcshoeco024]

yes but when installing something big like this it is always smart to backup and be safe. a backup makes an exe file on your phone of everything at the moment, programs, games, registry,contacts, etc,etc....... than if something goes wrong all you need to do is click on that restore from the storage card and it willl bring it back to the state of that backup.... just like go back on your computer.

how do u back up things on your device?

[D/\SH]

how do u back up things on your device?

please search there are many apps out there. you can use swcked backup, sprite backup, sktools, etc.

[xxdbkxx]

Trying to get the icons on the cube to work. For example, when I click on word or excel I get a message saying........

The file " cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.

I used config 4.1 and tried to remap it, but no luck.

What am I doing wrong?

[D/\SH]

Trying to get the icons on the cube to work. For example, when I click on word or excel I get a message saying........

The file " cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.

I used config 4.1 and tried to remap it, but no luck.

What am I doing wrong?

you have to soft reset after the changes and that will clear that error up for you.

[mwrood]

Hello all....i installed this program a couple months ago and decided to remove it...the other day i was looking through my saved programs on my home pc and couldnt remember why i removed this from my phone so i decided to re-install it...come to find out, the reason i removed it was because before i installed it i had around 18-20 mb of free ram but afterwards i had half that with all other programs closed...is this normal and if so is there any way to completely close it so it's not running at all or a program to minimize the amount of free ram it uses??? thanks in advance

[D/\SH]

Hello all....i installed this program a couple months ago and decided to remove it...the other day i was looking through my saved programs on my home pc and couldnt remember why i removed this from my phone so i decided to re-install it...come to find out, the reason i removed it was because before i installed it i had around 18-20 mb of free ram but afterwards i had half that with all other programs closed...is this normal and if so is there any way to completely close it so it's not running at all or a program to minimize the amount of free ram it uses??? thanks in advance

no there isnt since it automatically boots up at startup of the phone.

[john21]

Ok dash let me try again on this one......lol.....I loaded this program on my mogul......along with the 4.1 config program too....My questions are how does the cube gestures work....I tried flicking to the right and left of the screen to see if the cube rotates and nothing happened also tried up and down and still nothing? Question 2 when my phone starts up the only screen that opens is the default today screen of the mogul not the Icube screen is it normal to have to manually go into ur start menu and click so the cube shows up or is it supposed to start up automatically upon turning on ur phone.......Thanks and I hope I posted this in the right place

[D/\SH]

Ok dash let me try again on this one......lol.....I loaded this program on my mogul......along with the 4.1 config program too....My questions are how does the cube gestures work....I tried flicking to the right and left of the screen to see if the cube rotates and nothing happened also tried up and down and still nothing? Question 2 when my phone starts up the only screen that opens is the default today screen of the mogul not the Icube screen is it normal to have to manually go into ur start menu and click so the cube shows up or is it supposed to start up automatically upon turning on ur phone.......Thanks and I hope I posted this in the right place

ummm bro the cube is finger flick controlled and and not through apps not even in the apps file... did you install bith can files from the zip in the first post?

[john21]

ummm bro the cube is finger flick controlled and and not through apps not even in the apps file... did you install bith can files from the zip in the first post?

Hmmmm? interesting yes I downloaded both just like the sticky said....even the 4.1 config too.......did the soft reset for each file I downloaded....the files downloaded successfully to the mogul....but the cube does not want to rotate or flick for whatever reason.....I might try uninstalling and trying again.....

[D/\SH]

Hmmmm? interesting yes I downloaded both just like the sticky said....even the 4.1 config too.......did the soft reset for each file I downloaded....the files downloaded successfully to the mogul....but the cube does not want to rotate or flick for whatever reason.....I might try uninstalling and trying again.....

that would be your best bet.....

[futuristic23]

And for all you Mogul owners who want some iCube action, here's what you do:

Install this cab:

http://rapidshare.com/files/75947199/HTCCube_FTouchFlo_TFloCubeCtrlv110_Config-xplode.cab

Soft reset, make sure the Touch Flo Cube is Working, then install the next rapidshare link and install the cab but please backup your phone before doing this. also the video is attached below so you can see what it looks like also if you havent seen this before.

http://rapidshare.com/files/76500889/iCube4Mogul.zip.html

http://www.youtube.com/watch?v=sCQ2MVyFULc

does this only work for the touch or can you use it on the mogul? and how do you activate it on your phone?

[futuristic23]

And for all you Mogul owners who want some iCube action, here's what you do:

Install this cab:

http://rapidshare.com/files/75947199/HTCCube_FTouchFlo_TFloCubeCtrlv110_Config-xplode.cab

Soft reset, make sure the Touch Flo Cube is Working, then install the next rapidshare link and install the cab but please backup your phone before doing this. also the video is attached below so you can see what it looks like also if you havent seen this before.

http://rapidshare.com/files/76500889/iCube4Mogul.zip.html

http://www.youtube.com/watch?v=sCQ2MVyFULc

hey dash for some reason i installed this and i can't access the touch tehme. what am i doing wrong?

[bxgxd]

Can anyone help me? i just need to know how i can backup my phone? help plz?

[D/\SH]

does this only work for the touch or can you use it on the mogul? and how do you activate it on your phone?

theres a mogul one in the mogul section in the help desk

hey dash for some reason i installed this and i can't access the touch tehme. what am i doing wrong?

make sure touchsl is activated....also did you do a soft reset?

Can anyone help me? i just need to know how i can backup my phone? help plz?

please post in the correct area that has nothing to do with the icube. but do a search for sprite backup

[babydolltracy]

Ok just to make sure, this is for the PPC 6800 (mogul) right? if so i tried downloaded both files and load them on to my phone. I soft resetted and nothing worked? it remained on the original screen. Now i don't have anything on my phone except for the original settings and programs. Can you tell me what's going on? Oh yeah i tried uninstalling it and installing it about 3 times before I gave up. Tried looking for other people who have the same errors but no hope. (i read on something you said that said it will not work on moguL? but i didn't get it since this post said icube on mogul) Can you help me?

[D/\SH]

Ok just to make sure, this is for the PPC 6800 (mogul) right? if so i tried downloaded both files and load them on to my phone. I soft resetted and nothing worked? it remained on the original screen. Now i don't have anything on my phone except for the original settings and programs. Can you tell me what's going on? Oh yeah i tried uninstalling it and installing it about 3 times before I gave up. Tried looking for other people who have the same errors but no hope. (i read on something you said that said it will not work on moguL? but i didn't get it since this post said icube on mogul) Can you help me?

yes the title says mogul. all you do is in stall the cube can first than the icube cab second and than soft reset and you will be golden....... dont understand why it wouldnt work for you if you did that....... never gave me any problems. also im pretty sure there is a readme or nfo file you might want to try reading thta for install instructions (inside the zip/rar file)

[loki007420]

ok you only have to post once i already answered your same questions in a different thread. only warning on the double posting. slide2unlock that is a problem with the 2 programs since the cube wasnt ever meant to be on the mogul unless you are using the flashlight version than you can out it on the exclude list. and for the other i dont know what to tell you.... prolly s2u also but seriously why the big deal on that i only allign my screen once and that is when i do a hard reset or flash my rom.


this kinda confused me, im really intrested in using this program, i was using UL but that kinda drove me nuts (had some problems and didnt bother to look it up).. Does this not play well with s2unlock? :hiding:

[D/\SH]

this kinda confused me, im really intrested in using this program, i was using UL but that kinda drove me nuts (had some problems and didnt bother to look it up).. Does this not play well with s2unlock? :hiding:

plays fine with the newes version of S2U2. and all you do is install the 2 cab files.

[Troublerite]

DASH,

Is this (...fig-xplode.cab) also the link for downloading the iCube on the Sprint Touch? I attempted to do so on my storage card and got the message:

"Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permission."

[lunatic9025]

Ok when i click on _setup it takes me 2 the internet for some reason, I guess my question is wat king of program is the setup so it will stop thinking that it is an internet file or something?

[D/\SH]

Ok when i click on _setup it takes me 2 the internet for some reason, I guess my question is wat king of program is the setup so it will stop thinking that it is an internet file or something?

just follow the steps and install the 2 cab files bro..... they have to be done on the phone not the computer.

[lunatic9025]

Yea thats wat im sayin, i click setup and it goes str8 to IE... i have no idea y...

[BiG JeW]

Yea thats wat im sayin, i click setup and it goes str8 to IE... i have no idea y...
Soft reset and try again.. you are installig the files from the phone?!

[lunatic9025]

yea, im doin this on my phone, soft reset with no luck... ok the setup is an XML Source File, all other downloads are WinRAR archives when im on the computer then when i get to the phone there is no problem, but when on the computer for this setup is a XML source file instead of WinRAR and when i get to the phone it shows up as an internet explorer file...

[BiG JeW]

yea, im doin this on my phone, soft reset with no luck... ok the setup is an XML Source File, all other downloads are WinRAR archives when im on the computer then when i get to the phone there is no problem, but when on the computer for this setup is a XML source file instead of WinRAR and when i get to the phone it shows up as an internet explorer file...
Dude you need to intall the first link from the phone. the second link you need to extract the winzip files from the pc and then follow the steps.... ITs written on the top!!

[lunatic9025]

the first link is not installing when i click on setup on the PHONE, it is bringing up the internet browser with all the code i guess..

[D/\SH]

the first link is not installing when i click on setup on the PHONE, it is bringing up the internet browser with all the code i guess..

what are you talking about they are cab files you are prolly clicking the xml file which meands you uncompressed too far........ go to the noob guide and rea thta beofre trying this so you can learn to install cab files....... you want it to end in .cab

[BiG JeW]

what are you talking about they are cab files you are prolly clicking the xml file which meands you uncompressed too far........ go to the noob guide and rea thta beofre trying this so you can learn to install cab files....... you want it to end in .cab
lmao!

[lunatic9025]

omg i have many programs on my mogul i kno how 2 install cab files since day one, D/\SH im tellin u this one file is not appearing on my screen as a cab file, lyk no bs im not a noob... it says its an xlm file which is a java file, i have no idea y its sayin that, i jus wanna kno if u have any suggestions...

[lunatic9025]

oh by the way im unzippin wit winRAR...

[D/\SH]

oh by the way im unzippin wit winRAR...

yea as i said above you went to far with unzipping you can take apart a cab file you know....!!!!!!!

[lunatic9025]

ok i figured it out, when rapidshare downloads the software it automatically sends it to winRAR to unzip and stuff, but this file didnt need unzipping so since i use firefox it doesnt ask me whether i want to save or open the file it automatically opens to WinRAR, wat i did was try it wit internet explorer and ie gives u the option to save or open so i jus saved which bypassed the unzipping using winRAR

[ShakerHP]

Greetings;
I really like this iCube thing for the Mogul, but is there a way to edit the contacts block, the button, instead of it going to the stock contacts i would like it to go to iContact.exe??? is there a way to do this?

Thank You!

Shaker HP

[D/\SH]

Greetings;
I really like this iCube thing for the Mogul, but is there a way to edit the contacts block, the button, instead of it going to the stock contacts i would like it to go to iContact.exe??? is there a way to do this?

Thank You!

Shaker HP

yes as said before use the app called cube config. you cna find by doing a search.

[Mike20PR]

i installed the icube but the launcher side doesnt display properly, it shows the names but the display is stuck in the animation inbetween pages, and its black
Posted via Mobile Device

[D/\SH]

i installed the icube but the launcher side doesnt display properly, it shows the names but the display is stuck in the animation inbetween pages, and its black
Posted via Mobile Device

have you tried to soft reset and you installed to the main memory and noty the card right because the card loads slower than the stuff on the main memory which can casue the images to load slower giving you the problem you have.

[Bigoc50]

hey, I installed the touch flo on my tytn ll and its working alright, but the problems came when I installed the icube for the mogul, I since then hard reseted and just use touchflo, but is there any way I can have icube as well...... the main problems were the icons didnt go to anything like my touchflo now my music icon doesnt work it keeps saying audio manageer isnt there or somthing.

[D/\SH]

hey, I installed the touch flo on my tytn ll and its working alright, but the problems came when I installed the icube for the mogul, I since then hard reseted and just use touchflo, but is there any way I can have icube as well...... the main problems were the icons didnt go to anything like my touchflo now my music icon doesnt work it keeps saying audio manageer isnt there or somthing.

you are really confusing can you try to be more specific on what you want?????? your jumping all over the place and cant get a grasp on what you are saying.

[cuz215]

a

[D/\SH]

a

what is that supposed to mean please dont trash the threads with useless and meaningless poswts. Thanks

[cuz215]

use cube config 4.1


I've done some searching, but I'm not able to fine a download for cube config 4.1. I've got 3.0, so I figure thats the reason why I can't customize all the buttons that aren't working with this app. Where can I find CubeConfig4.1?

Oh and thanks for the app, outside of not being able to customized the buttons yet, this app kicks ass!! Thanks

[D/\SH]

I've done some searching, but I'm not able to fine a download for cube config 4.1. I've got 3.0, so I figure thats the reason why I can't customize all the buttons that aren't working with this app. Where can I find CubeConfig4.1?

Oh and thanks for the app, outside of not being able to customized the buttons yet, this app kicks ass!! Thanks

bro search for cube customizer or just customizer and you will find it not that hard and also stickied if not mistaking under the 6800 and touch areas of the help desk..... PLEASE SEARCH!!!!

[cuz215]

bro search for cube customizer or just customizer and you will find it not that hard and also stickied if not mistaking under the 6800 and touch areas of the help desk..... PLEASE SEARCH!!!!


bro, I must be doing something wrong. I keep coming up wiht the same threads and none have the app, I can only find post's mentioning it. You said it was easy to find, so what am I doing wrong when I search in thread titles, and in all post. I search for cube customizer, cube configurator, cube config, icube config, icube customizer, ect., and I still get all the same threads with no app. Any help would be appreciated. Thanks

[D/\SH]

bro, I must be doing something wrong. I keep coming up wiht the same threads and none have the app, I can only find post's mentioning it. You said it was easy to find, so what am I doing wrong when I search in thread titles, and in all post. I search for cube customizer, cube configurator, cube config, icube config, icube customizer, ect., and I still get all the same threads with no app. Any help would be appreciated. Thanks

e you joking searched cube customizer and found it right away: https://www.wckediden.com/showthread.php?p=189695#post189695

[cuz215]

Thanks,
I ended up getting it from the following link. Incase anyone wants.


D/\SH EDIT: deleted link since we have posted here and working fine without any troubles.... no need to make people go elsewhere for the same thing.


Cool, no problem. This cube setup is bad ass bro, I've been tring three different iphone interfaces, and this is, by far in my opinion, the best. Thanks for the help!!

[cuz215]

Hey is there a database for additional icons for this config? Or is there an easy way to config teh icons for using Config 4.1? I change the icons to a different .brn file, but there is no change. Any suggestion?

[D/\SH]

Hey is there a database for additional icons for this config? Or is there an easy way to config teh icons for using Config 4.1? I change the icons to a different .brn file, but there is no change. Any suggestion?

did you sift reset after you changed the icons cause the cubeconfig does work........ and for the files to work you have to have the dimensions exactly correct or they wont work period.

[princessmari11]

do i have to be premuim memeber to get it ???? b/c i do not want it stopping after 90 days..........

[broSki]

do i have to be premuim memeber to get it ???? b/c i do not want it stopping after 90 days..........

no u dont, all apps here are full versions

[graff3]

installed the programs but as stated earlier it did not want to autostart. i followed the directions as stated above. i am trying to reinstall right now, the only thing it gave me after install was a toold folder in the programs. how do i get it up and running?

P.S. after i installed icube it said it may not work because it is for an older version of windows

[D/\SH]

installed the programs but as stated earlier it did not want to autostart. i followed the directions as stated above. i am trying to reinstall right now, the only thing it gave me after install was a toold folder in the programs. how do i get it up and running?

P.S. after i installed icube it said it may not work because it is for an older version of windows

bro look at the title made for moguil and it does work ive used it you swipe your finger up you dont open with a folder. go to options and look at touchflo config and make sure bottom to top is open cube and top to bottom is close cube.

[graff3]

i figured out how to work it, now it asks me if i have touchflo installed when i try opening cube settings.

[raybond25]

i figured out how to work it, now it asks me if i have touchflo installed when i try opening cube settings.
well, do you have touchflo installed? lol if you don't then logically that would be the place to start

[graff3]

touchflo is installed man

[raybond25]

did you soft reset after insalling both cabs?

[jmart]

when i opened up the zip for the cube, it downloaded but stated that it was for an older version and may not work properly. I did a soft reset and nothing happened, ever run into this before. I'm running wm 6 pro with the 2.17 rom update

[D/\SH]

when i opened up the zip for the cube, it downloaded but stated that it was for an older version and may not work properly. I did a soft reset and nothing happened, ever run into this before. I'm running wm 6 pro with the 2.17 rom update

bro i didnt mean here i meant where you got the files.... and you downloaded the mogul version correct since you do have the mogul..... if not thats why nad it will always say that since it is a custom made application... also there will be two files the skin and touchflo

[GokuSS3]

This is a great app for the Mogul huge upgrade from the normal Cube.... Thanks

[GokuSS3]

Dash I lose my screen taps when i have the cube installed anyway to get those back ? Or does is require a reg edit ?

[D/\SH]

Dash I lose my screen taps when i have the cube installed anyway to get those back ? Or does is require a reg edit ?

there is no way to get them back period.

[GokuSS3]

Dam that sucks oh well can live with out it.....

[D/\SH]

Dam that sucks oh well can live with out it.....

lmao word i did that on my mogul since i used touchflo but not the cube.

[GokuSS3]

Not to get off topic for long but when does Sprint get the Pro Touch ? Phone looks sick in the you tube videos

[D/\SH]

Not to get off topic for long but when does Sprint get the Pro Touch ? Phone looks sick in the you tube videos

in a couple weeks do a searh for it i even wrote my review since i got it.

[GokuSS3]

A Search here in Wckediden or on youtube ? And thanks for the info....

[GokuSS3]

lmao nevermind dont ask answer that dumb question.....

[D/\SH]

dfo a search here for it.

[heartbeat7]

Thank you Dash. I want to thank you for developing an icube program for the mogul that works. I followed the instructions above and everything is working fine. I have the htc mogul phone with 6.1 rom. I am still playing with it, and love every new thing I figure out. Thanks again.

Heartbeat7

[D/\SH]

Thank you Dash. I want to thank you for developing an icube program for the mogul that works. I followed the instructions above and everything is working fine. I have the htc mogul phone with 6.1 rom. I am still playing with it, and love every new thing I figure out. Thanks again.

Heartbeat7

thanks i just posted this though i didnt make it.

[potter]

ok i get an error massage it says

An unexpected erro has occurred in
cube config.exe.
select quit and then restart this program, or select detail
for more information

[D/\SH]

ok i get an error massage it says

An unexpected erro has occurred in
cube config.exe.
select quit and then restart this program, or select detail
for more information

did you soft reseet after install... if still doesnt work try and uninstall and reinstall.

[flynfresh2def]

The First link doesnt work

[raybond25]

The First link doesnt work
the link works fine i just checked it

[flynfresh2def]

and where is the video because it looks like nothing has changed in my phone

--------- New Post Merged on 26/9/2008 at 02:54:08 --------

maybe it doesnt work because I have windows 6.1

[raybond25]

and where is the video because it looks like nothing has changed in my phone

--------- New Post Merged on 26/9/2008 at 02:54:08 --------

maybe it doesnt work because I have windows 6.1
well for this to work you have to have touchflo installed on your device...you can find touchflo with a search on the site

[flynfresh2def]

I have HTCCUBE_FTTouchFLO_TFLOCubeCtrlv but it keeps asking it its intalled

[GokuSS3]

I have HTCCUBE_FTTouchFLO_TFLOCubeCtrlv but it keeps asking it its intalled

So you installed that cab touchflo softreset your device then download the icube cab and softreset again when you pull up the cube it be the icube. What does your device keep asking you to install ?

[flynfresh2def]

when I instailed the icube, i did the soft rest, when the phone turned back on it looked the same......... what did i do wrong.......

[raybond25]

there is a separate cab for app that's called fTouchflo (do a search and you WILL find it) that needs to be installed for this to work.

[flynfresh2def]

fTouchflo? thats what its called?

[raybond25]

fTouchflo? thats what its called?
yes that is what it's called

[flynfresh2def]

man I quit lol....... i'm missing something i dont know..... now when my phone starts it has a error sign saying FTouchFlo already running and it still looks the same and then when i hit cube setting it says can not read existing settings- is HTC Touch Flo installed?.......... this is crazy

[D/\SH]

man I quit lol....... i'm missing something i dont know..... now when my phone starts it has a error sign saying FTouchFlo already running and it still looks the same and then when i hit cube setting it says can not read existing settings- is HTC Touch Flo installed?.......... this is crazy

let me guess you are running wm 6.1 arent you?

[flynfresh2def]

yes I am windows 6.1..........

[D/\SH]

yes I am windows 6.1..........

CHA CHINGgggggg!!!!! 3 POINTS FOR THE D/\SHINATOR!!!!!

as said a couple pages back this will only work on WM 6

[flynfresh2def]

damn..... is there anything that will work for the 6.1?

[D/\SH]

damn..... is there anything that will work for the 6.1?

musicflo works great with WM 6.1

[heartbeat7]

Hi,

I have the cube loaded on my mogul. Works great. I wanted to experiment with changing the icons to one I designed. I was able to change the name under the icon but the icon I was replacing it wouldn't change. I tried putting the new icon in the same folder as the rest of the icons, but still didn't work. Even tried switching the im idon with the mail icon, but that didn't work either. If I create a icon with a brn format should I be able to make my own icons.

thanks
heartbeat7

[D/\SH]

Hi,

I have the cube loaded on my mogul. Works great. I wanted to experiment with changing the icons to one I designed. I was able to change the name under the icon but the icon I was replacing it wouldn't change. I tried putting the new icon in the same folder as the rest of the icons, but still didn't work. Even tried switching the im idon with the mail icon, but that didn't work either. If I create a icon with a brn format should I be able to make my own icons.

thanks
heartbeat7

yes you will, they have to be brn icons otherwise wont work for you :<

[HoodRich]

how do i soft reset my phone?
then how do i back up my phone?

[Fatal_Error]

Soft reset = look @ the bottom of the phone look for a small hole and stick the stylus in there

Back up = do a search for PIM back up I will try and post a link for you http://www.pocketpcfreewares.com/en/index.php?soft=1806

[D/\SH]

how do i soft reset my phone?
then how do i back up my phone?

to soft reset you use the stylus and stick it in the small hole onm the bottom of the phone by where the micro sd card inerts.... and for backign up you could use an applike resco backup, sprite backup, swcked backup, etc etc

[HoodRich]

i half to pay for the backup?

[Fatal_Error]

No its freeware

[HoodRich]

oo thanks does anybody have the link?

[Fatal_Error]

If you look up a few post I gave you a link. Also if we have helped you please hit the rep or the thanks please

[HoodRich]

i looked but no luck...

[Fatal_Error]

look right above this post

[DJCaSpER]

hey dash I can't change the setting it says I have to have htc touchflo instald. witch I do and I can't figure why its not working. the cube is great but have a few dead icons that don't work. is there a way to make the 4 sided cube to have 6 sides or no? also how do I change the icons that's aree already up because the 3 bottom icons are the same on both sides of the cube.

[D/\SH]

hey dash I can't change the setting it says I have to have htc touchflo instald. witch I do and I can't figure why its not working. the cube is great but have a few dead icons that don't work. is there a way to make the 4 sided cube to have 6 sides or no? also how do I change the icons that's aree already up because the 3 bottom icons are the same on both sides of the cube.

than use the cube config tool 4.1 and all you will have to do is change it through there.

[bill]

the link for the video isnt there

[PHE-NOM]

hey dash just wanted to say thanks for this and alllllllllllllllllllllllll the appl that you put out man. works really good on my mogul.

[D/\SH]

hey dash just wanted to say thanks for this and alllllllllllllllllllllllll the apps that you put out man. works really good on my mogul.

hahahhahaa no problem bro glad that you like the site and all the goodies :>

[MotoMoto]

I need help with ICube for my Mogul.
Ok, first I would like to acknowledge that I am a bit behind the curve. Just a couple of weeks ago, I upgraded the rom on my phone from the Sprint website to Windows mobile 6.1. Then, I installed Manilla2d and it works like a charm. I then installed the ICube interface from this thread, and again, works beautifully. All the instructions were so well laid out that even a noob like me could follow them. But I don't use the ICube so I would like to uninstall it since I could use all the free space I can get on my Mogul. I have tried to uninstall and I am having trouble.
I go to Settings/System/Remove Programs. The only programs in memory are "xda-developers HTC cube" and "MusicMan_ Zyphlin iCube". When I select either one and click on remove, I get the standard warning message that asks if I am sure, and I click yes. Then the wait icon rotates a few times and thats it. My phone locks up. Screen goes black after a while and green LED keeps flashing, but nothing else. I have let it sit that way for about 30min. Then I soft reset and everything is fine and all programs are still intact and working perfectly.
I have done a search and while I have found where others are instructed to uninstall and re-install, I haven't been able to find my problem anywhere. I am totally lost.
Thanks in advance for any help given.

[D/\SH]

I need help with ICube for my Mogul.
Ok, first I would like to acknowledge that I am a bit behind the curve. Just a couple of weeks ago, I upgraded the rom on my phone from the Sprint website to Windows mobile 6.1. Then, I installed Manilla2d and it works like a charm. I then installed the ICube interface from this thread, and again, works beautifully. All the instructions were so well laid out that even a noob like me could follow them. But I don't use the ICube so I would like to uninstall it since I could use all the free space I can get on my Mogul. I have tried to uninstall and I am having trouble.
I go to Settings/System/Remove Programs. The only programs in memory are "xda-developers HTC cube" and "MusicMan_ Zyphlin iCube". When I select either one and click on remove, I get the standard warning message that asks if I am sure, and I click yes. Then the wait icon rotates a few times and thats it. My phone locks up. Screen goes black after a while and green LED keeps flashing, but nothing else. I have let it sit that way for about 30min. Then I soft reset and everything is fine and all programs are still intact and working perfectly.
I have done a search and while I have found where others are instructed to uninstall and re-install, I haven't been able to find my problem anywhere. I am totally lost.
Thanks in advance for any help given.

i looked at your profile and that told me the answer so by not reading through this thread you wasted a lot of time unfortunately.... you have WM 6.1 and all of the custom cubes besides musicflo wont work on 6.1 since they are strictly made from the 6.0 interface :<